SG1000A Slide Gate Sensor Reliable Products Trustworthy People Slide Gate & Valve Position Measures multi-turn shaft angle (rotational) position Translates linear position to 4-20 mA output Configurable measurement range (0-1/4 turn to 0-6 turns) Direct shaft attachment (3/8-16 UNC) Applications include electrically / manually-driven rack-and-pinion gates and valves • 24 VDC powered • Cast aluminum explosion proof (XP) housing • UL Listed Class I, Div I (C, D) Class II, Div I (E, F, G) The SG1000A is a Slide Gate/Valve position sensor with a 4-20 mA DC output signal. The SG1000A is a rugged encoder-based sensor that accurately monitors a slide-gate or valve position, allowing for precise product flow and blending operations. Once programmed for the application’s fully-closed/fullyopen positions, the SG1000A’s output is 4 mA for fully-closed and 20 mA for fully-open. Any gate or valve position between the two end-point positions is represented by the output signal being proportionally between 4 and 20 mA. The SG1000A Slide Gate/Valve position sensor mounts directly to the end of the drive shaft of a slide gate or valve and is easily calibrated with a single push-button switch for setting the application’s fully-closed/fully-open positions. A second switch (selects clockwise/ counterclockwise rotation) enables the user to mount the SG1000A on either end of the application’s drive shaft. The SG1000A’s 4-20 mA output can be sent to a device such as a PLC or Electro-Sensors optional TR400SGA Remote Display to provide the operator with immediate at-a-glance information on the position of the gate or valve. The TR400SGA can be programmed to display from 0 percent at the fullyclosed position through 100 percent at the fully-open position. The TR400SGA offers +24 VDC output power for the SG1000A, two relays, and an isolated 4-20 mA proportional output that can be used to pass the 4-20 mA signal along to another device. As the drive shaft rotates, the SG1000A measures the rotation and outputs the 4-20 mA signal to a PLC or the Electro-Sensors optional TR400SGA Remote Display. The SG1000A’s output signal is 4 mA for fully-closed and 20 mA for fully-open. Any gate or valve position between the two end-point positions is represented by the signal being proportionally between 4 and 20 mA. SG1000A Process Shaft Stabilizer Bracket (use is optional) Flexible Conduit Structural Framework The SG1000A with optional TR400SGA remote display 6111 BLUE CIRCLE DRIVE

Reliable Products Trustworthy People SG1000A Slide Gate Sensor Slide Gate & Valve Position Red Clear Black Shield Ordering All models come with a standard bracket for mounting. Input Power Voltage Model Description Output Type General Specifications Part Number SG1000A Slide Gate Sensor 1/4 turn minimum, 6 turns maximum 0.2% to 5% dependent upon calibration span Part Number Center drill and tap the shaft to a depth of 0.625" for a 3/8-16 UNC thread. The use of a stabilizer bracket is recommended, but may not be required in all applications. Operating Temperature Terminal Block Wiring 10 feet...