One INCH MOTOR PROTECTOR G TYPE
3Pages

One inch motor protector G TYPE The G motor protector is designed to protect single phase induction motor against overload and locked rotor conditions. The most frequent application is found in compressors, air conditioning, commercial refrigeration and pumps. GENERAL CHARACTERISTICS • CONTACT CONFIGURATION: Single pole - Double break. • TEMPERATURE ADJUSTMENT: Low capacity: 60A at 120Vac, 45A at 240Vac; High capacity: 80A at 120Vac, 60A at 240Vac. Above ratings are locked-rotor inductive currents (LRA) Automatic reset Standard open from 105°C to 150°C + 5°C; Standard close from 52°C to 102°C + 9°C Manual reset Open from 100° C to 150°C +5°C; Manual Reset after 3s from trip; • TRIP-FREE OPERATION: • TERMINAL CONFIGURATION: No manual reset is possible under fault condition. %” quick-connect M3.5 screws Solder terminal Cable leads (AWG 14 or AWG 16) C UL 51822

OUTLINE DRAWINGS senza resistenza (without heater) For special applications or mountings not shown in this catalogue, please contact the Factory Electrica s.r.l. - via privata Della Torre, 24 - 20127 Milano - Italy Tel. +39 02 2892641 Fax +39 02 2827511 www.electrica.it info@electrica.it