1. Catalogs
  2. ELECTREX
  3. RS485 CABLES

RS485 CABLES

RS485 CABLES

Product catalog summary
Overview: The document provides technical specifications and ordering information for RS485 line cables used in local area networks. These cables are designed for high-quality transmission in environments with high interference and are suitable for both standard and underground installations.
Specifications:
  • Conductor: Tinned flexible copper.
  • Insulation: Flame retardant PVC according to IEC 332-3C.
  • Screen: Overlapping aluminum/polyester foil with tinned copper braid, approximately 70% coverage.
  • Jacket: Flame retardant PVC, grey RAL 7035, compliant with CEI 20-22 II° and IEC 332-3C.
  • Technical Data:
    • Number of pairs and section: 2x2x0.22 mm².
    • Nominal voltage: 220 V.
    • Test voltage: 2000 V.
    • Temperature range: -10 °C to +80 °C.
    • Radiation resistance: 80 Mrad.
    • Minimum bending radius: 12 x Ø.
    • Insulation resistance: > 200 MOhm x km.
    • Conductor resistance: < 90 Ohm/km (0.22 mm²/AWG24).
    • Capacitance: < 130 pF/m.
    • Colour code: According to DIN 47100.
Standards: The cables comply with several standards including ISO/IEC 11801, EN 50173, EIA/TIA 568 A, IEC 332.1, IEC 332.3, CEI 20-35, CEI 20-32 II, and CEI 20-37 I.
Ordering Information:
  • RS485 line cable (100m): 2-pairs, double screen, 100 m roll (Code: CE00103).
  • RS485 line cable (500m): 2-pairs, double screen, 500 m roll (Code: CE00105).
  • RS485 line cable U (100m): 2-pairs, double screen, for underground installation, 100 m roll (Code: CE00107).
  • RS485 line cable U (500m): 2-pairs, double screen, for underground installation, 500 m roll (Code: CE00109).
Contact Information: Electrex is a trademark of Akse srl, located at Via Aldo Moro, 39 - 42100 Reggio Emilia (RE) - ITALY. Contact via phone at +39 0522 924244 or email at [email protected]. More information is available at www.electrex.it.
See more

Catalog excerpts

RS485 CABLES-1

Line cables for local area RS485 networks The line cables are used for installation of cabling systems, where high quality of transmission rates are demanded. The flexible computer cables are designed for the connection of electronic equipment in environments with high interference that impose excellent efficiency of the screen. Available also for underground installation. Conductor: tinned flexible copper Insulation: flame retardant PVC acc. to IEC 332-3C Screen: overlapping Al/polyester foil/tinned copper braid, coverage approx. 70% Jacket: flame retardant PVC acc. to CEI 20-22 II° and IEC 332-3C, grey RAL 7035 Technical data N. pairs and section: Nominal voltage: Test voltage: Temperature range: Radiation resistance: Insulation resistance: Conductor resistance: Colour code: Subject to modification without prior notice Your distributor Electrex is a trademark of Akse srl Via Aldo Moro, 39 - 42100 Reggio Emilia (RE) - ITALY Tel : +39 0522 924244 - Fax : +39 0522 924245 www.electrex.it - email: [email protected] Data-sheet RS485 line cable 2007 10-EN

 Open the catalog to page 1

Archived catalogs

  1. Flash D6

    4  Pages

  2. X3M-96

    8  Pages

  3. X3M

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.