video corpo

MPGS - 4 Pages

Add to MyDirectIndustry favorites
MPGS

Catalog excerpts

ONE-PIECE CONSOLES IN STAINLESS STEEL IP 66 | TYPE 4X, 12, 13 | IK 10 (single door); IP 55 | TYPE The stainless steel compact console, MPGS, in a IP 55/56 protection degree is available off the shelf. It has a hinged desk panel, and the ergonomic design allows for easy installation and access to HMI-equipment- It also increases the mounting space available. This console can be installed in virtually any environment, grade dependent. Material: AISI 304 pre-grained stainless steel / AISI 316L (on request). Body and door: 2 mm. Rear panel: 1.5 mm. Bottom plates: 1.5 mm. Mounting plate: 2.5 mm galvanized steel. Body: Folded and seam welded. Console construction counts with a base that provides a distance between the fl oor and the lower part of the door/s acting as an integrated plinth. Doors and panels: Single folded surface mounted with hinges allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges on top edge allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 wide base units. Mounting plate: Standard mounting plate in base unit. Lock: Double-bit 3 mm locks for top panel. For base, two doublebit 3 mm locks. Other options available. See wall mounting section. Cable inlet: Bottom opening for cable access. Bottom plate for cable glanding supplied as standard. Earthing: M8 threaded studs on body, door, top panel and rear panel. Finish: 240s pre grained stainless steel (average 0,5 micron). Protection: Single door: IP 66 | TYPE 4X, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10. Approvals: CE, CSA, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed. Delivery: Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.

 Open the catalog to page 1

MPGSONE-PIECE CONSOLES IN STAINLESS STEEL door Sectional side view Inside panel view 00    W-207 Inside door view Double door Front view Sectional side view Inside panel view Inside doors view

 Open the catalog to page 2

Stainless steel Enclosure dimensions    Mounting plate dimensions Note: Only 1200 mm wide consoles have double door.

 Open the catalog to page 3

ONE-PIECE CONSOLES IN STAINLESS STEEL

 Open the catalog to page 4

All ELDON catalogs and technical brochures

  1. PRODUCT CATALOG

    708 Pages

  2. MKSL

    4 Pages

  3. HMI

    74 Pages

  4. EHTC

    1 Pages

  5. CCG

    1 Pages

  6. CCF

    1 Pages

  7. CEPR

    1 Pages

  8. CEP

    1 Pages

  9. CAG

    1 Pages

  10. SASM

    4 Pages

  11. SASL

    4 Pages

  12. OICP

    4 Pages

  13. OICE

    3 Pages

  14. MPCS

    3 Pages

  15. MPC

    4 Pages

  16. MPG

    4 Pages

  17. MCM

    4 Pages

  18. OABP

    4 Pages

  19. SABP

    4 Pages

  20. DABP

    4 Pages

  21. UDP/UDPT

    4 Pages

  22. UCP/UCPT

    4 Pages

  23. CED

    1 Pages

  24. CES

    1 Pages

  25. CPG

    1 Pages

  26. MAP

    4 Pages

  27. MAD

    3 Pages

  28. MAS

    6 Pages

  29. EKDS

    2 Pages

  30. MCD

    3 Pages

  31. MCS

    4 Pages

  32. Floor Standing

    258 Pages

  33. Wall Mounted

    144 Pages

  34. Terminal Boxes

    62 Pages

Archived catalogs