MPC
4Pages

{{requestButtons}}

Catalog excerpts

MPC - 1

CONSOLE SYSTEM IP 66 | TYPE 4, 12, 13 | IK 10 (single door); IP 55 | TYPE This mild steel combinable console system, MPC, has a IP 55/56 protection degree. It includes three interchangeable sections, top, desk and bottom. The system is very flexible and the various possible combinations can meet many design requirements. The ergonomic design of the top and desk units allows for easy installation and access to HMI-equipment, and increases the mounting space available. Stainless steel panels may be used as an alternative for some parts of the console, should it be exposed to chemical agents, etc. Material: Body and door: 1.5 mm mild steel. Rear panel: 1.5 mm mild steel. Bottom plates: 1.2 mm galvanized steel. Mounting plate: 2.5 mm galvanized steel. Body: Folded and seam welded. Console construction counts with a base that provides a distance between the fl oor and the lower part of the door/s acting as an integrated plinth. Doors and panels: Single folded surface mounted with hinges allowing left and right-hand opening to base door. Top section and desk panels held open by self engage/self release mechanical panel stays. Concealed hinges allowing 90° opening on the desk. Double door on 1200 and 1600 mm wide base units. Mounting plate: Standard mounting plate in base unit. Fixed by fixing brackets on C rail, top and bottom for depth adjustment. Optional in desk and top section units. Lock: Double-bit 3 mm locks for top section and desk unit. For base, two double-bit 3 mm locks. Other options available. See wall mounting section. Cable access: Bottom opening in base unit for cable access. Bottom plates for cable glanding supplied as standard. Earthing: M8 threaded studs on bodies, doors and rear panels. Finish: RAL 7035 structured powder coating. Protection: Single door: IP 66 | TYPE 4, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10. Approvals: CE, CSA, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed. Delivery: The base unit is provided with a mounting plate as standard. Desk and top section units have mounting plates provided as accessories. All top and base openings can be closed by choosing the appropriate accessory plate. Suitable nuts and washers for the various earthing studs are provided.

Open the catalog to page 1
MPC - 2

MPCCONSOLE SYSTEM Base unit with mounting plate Front view Sectional side view Mounting plate Inside door view Double door Front view Sectional side view Inside right door Inside left door view 545

Open the catalog to page 2
MPC - 3

Top section units | Mild steel Enclosure dimensions 500800494MPC081R5 Desk units | MitdP steel1050494MPC101R5 Enclosure dimensions H W D Item no. 250600985MPC062R5 250800985MPC082R5 Base units witlTWiounting plate | Mild steel 1000 985 mpc102r5 Enclosure dimensions Mounting plate dimensions Usable depth Note: Only 1200 mm and 1600 mm wide consoles have double door.

Open the catalog to page 3

All ELDON catalogs and technical brochures

  1. PRODUCT CATALOG

    708 Pages

  2. MKSL

    4 Pages

  3. HMI

    74 Pages

  4. EHTC

    1 Pages

  5. CCG

    1 Pages

  6. CCF

    1 Pages

  7. CEPR

    1 Pages

  8. CEP

    1 Pages

  9. CAG

    1 Pages

  10. SASM

    4 Pages

  11. SASL

    4 Pages

  12. OICP

    4 Pages

  13. OICE

    3 Pages

  14. MPCS

    3 Pages

  15. MPGS

    4 Pages

  16. MPG

    4 Pages

  17. MCM

    4 Pages

  18. OABP

    4 Pages

  19. SABP

    4 Pages

  20. DABP

    4 Pages

  21. UDP/UDPT

    4 Pages

  22. UCP/UCPT

    4 Pages

  23. CED

    1 Pages

  24. CES

    1 Pages

  25. CPG

    1 Pages

  26. MAP

    4 Pages

  27. MAD

    3 Pages

  28. MAS

    6 Pages

  29. EKDS

    2 Pages

  30. MCD

    3 Pages

  31. MCS

    4 Pages

  32. Floor Standing

    258 Pages

  33. Wall Mounted

    144 Pages

  34. Terminal Boxes

    62 Pages

Archived catalogs