video corpo

MAS - 6 Pages

Add to MyDirectIndustry favorites
MAS

Catalog excerpts

The mild steel single door wall mounted enclosure range, MAS, with a IP 66 protection degree, is available off the shelf in many different sizes. This enclosure range is well suited for many different applications. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. Material: Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure. Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. There are studs to mount door profiles MMDP included as standard. Sealing is ensured by an injected one piece polyurethane gasket. Lock: Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. 1000 mm high enclosures and above have espagnolette three point locking. Other inserts are available as an accessory. Mounting plate: The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth. Gland Plate Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier. Protection: Complies with IP 66 | TYPE 4, 12, 13 | IK 10. For outdoor installation the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration. Approvals: CE, CSA, DNV-GL, GOST, Kema Keur -DEKRA, Lloyd's Register, RS, cULus_UL Listed. Finish: RAL 7035 structured powder coating. Delivery: Enclosure with door and two door mounting profiles, from size MAS0604015R5 and above. Gland plate(s) with gasket(s), plastic double-bit 3 mm key, and mounting accessories. MAS1006026R5 and above, come with a metallic key. Earthing facilities.

 Open the catalog to page 1

MILD STEEL, SINGLE DOOR ENCLOSURE

 Open the catalog to page 2

With mounting plate Enclosure dimensions    Mounting plate dimensions

 Open the catalog to page 3

With mounting plate Gland plate Size    Type    Openings    N° of locks    Weight (kg)    Item no.

 Open the catalog to page 4

Without mounting plate Enclosure dimensions    Gland plate

 Open the catalog to page 5

Without mounting plate N° of locks    Weight (kg)    Item no. * 3 point espagnolette locking.

 Open the catalog to page 6

All ELDON catalogs and technical brochures

  1. PRODUCT CATALOG

    708 Pages

  2. MKSL

    4 Pages

  3. HMI

    74 Pages

  4. EHTC

    1 Pages

  5. CCG

    1 Pages

  6. CCF

    1 Pages

  7. CEPR

    1 Pages

  8. CEP

    1 Pages

  9. CAG

    1 Pages

  10. SASM

    4 Pages

  11. SASL

    4 Pages

  12. OICP

    4 Pages

  13. OICE

    3 Pages

  14. MPCS

    3 Pages

  15. MPGS

    4 Pages

  16. MPC

    4 Pages

  17. MPG

    4 Pages

  18. MCM

    4 Pages

  19. OABP

    4 Pages

  20. SABP

    4 Pages

  21. DABP

    4 Pages

  22. UDP/UDPT

    4 Pages

  23. UCP/UCPT

    4 Pages

  24. CED

    1 Pages

  25. CES

    1 Pages

  26. CPG

    1 Pages

  27. MAP

    4 Pages

  28. MAD

    3 Pages

  29. EKDS

    2 Pages

  30. MCD

    3 Pages

  31. MCS

    4 Pages

  32. Floor Standing

    258 Pages

  33. Wall Mounted

    144 Pages

  34. Terminal Boxes

    62 Pages

Archived catalogs