MAP
4Pages

{{requestButtons}}

Catalog excerpts

MAP - 1

The mild steel single door wall mounted range, MAP, with a IP 66 protection degree, comprises enclosures with a horizontally hinged door plus top and bottom gland plate openings. Each of these enclosures can be easily combined with another wall mounted enclosure, which allows for the creation of configurations with two compartments with individual access. Water and dust are prevented from entering the enclosure, thus eliminating the risk for component failure, and with that, unnecessary downtime. Material: Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 1.5 mm mild steel MAP0306030R5 / 2 mm MAP0308030R5 and above. Mounting plate: 2 mm galvanized steel. Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure. Front panel: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow top or bottom opening. Mechanical door stop keeps the panel open. One removable mounting profile on the hinge side. Sealing is ensured by an extruded one piece polyurethane gasket. Lock: Customised lock with double-bit for easy opening of the panel. Double-bit 3 mm insert and 90° movement. Other inserts are available as an accessory. Mounting plate: The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. Gland Plate Opening: In top and bottom. Situated at the far rear of the enclosure to make cabling onto the mounting plate easier. Gland plates (AF) and gaskets (AG) are not included. If the MAP panel is to be combined to an MAS or MAD enclosure, then the gland plate from the MAS/MAD enclosure can be used with the MAP panel. Protection: Mounted stand alone complies with IP 66 | TYPE 4, 12, 13 | IK 10, as long as you mount the gland plate(s) and gasket(s), supplied as an accessory. Combined with MAS or MAD complies with IP 55 | TYPE 12. Approvals: CE, CSA, GOST, Kema Keur -DEKRA, Lloyd's Register, cULus_listed. Finish: RAL 7035 structured powder coating. Delivery: Enclosure with panel and one panel mounting profile. Plastic double-bit 3 mm key and mounting accessories. Earthing facilities.

Open the catalog to page 1
MAP - 2

MAPMILD STEEL PANEL Inside panel view W-5

Open the catalog to page 2
MAP - 3

With mounting plate Enclosure dimensions Mounting plate dimensions With mounting plate 800 3qq 270 750 282 MAP0308030R5 Gland plate

Open the catalog to page 3
MAP - 4

MILD STEEL PANEL

Open the catalog to page 4

All ELDON catalogs and technical brochures

  1. PRODUCT CATALOG

    708 Pages

  2. MKSL

    4 Pages

  3. HMI

    74 Pages

  4. EHTC

    1 Pages

  5. CCG

    1 Pages

  6. CCF

    1 Pages

  7. CEPR

    1 Pages

  8. CEP

    1 Pages

  9. CAG

    1 Pages

  10. SASM

    4 Pages

  11. SASL

    4 Pages

  12. OICP

    4 Pages

  13. OICE

    3 Pages

  14. MPCS

    3 Pages

  15. MPGS

    4 Pages

  16. MPC

    4 Pages

  17. MPG

    4 Pages

  18. MCM

    4 Pages

  19. OABP

    4 Pages

  20. SABP

    4 Pages

  21. DABP

    4 Pages

  22. UDP/UDPT

    4 Pages

  23. UCP/UCPT

    4 Pages

  24. CED

    1 Pages

  25. CES

    1 Pages

  26. CPG

    1 Pages

  27. MAD

    3 Pages

  28. MAS

    6 Pages

  29. EKDS

    2 Pages

  30. MCD

    3 Pages

  31. MCS

    4 Pages

  32. Floor Standing

    258 Pages

  33. Wall Mounted

    144 Pages

  34. Terminal Boxes

    62 Pages

Archived catalogs