Specifications:
The document outlines the specifications for CuAg0,XX-rod, an oxygen-free copper alloy with varying silver content. The dimensions available are 8.0, 12.4, 15.8, and 20.0 mm. The maximum oxygen content is 10 ppm, typically 2 ppm. The silver content varies with specific tolerances for each designation, such as CuAg0.01 with 0.01% Ag and CuAg0.10 with 0.10% Ag.

Form of Delivery:
The rods are delivered in loose laid coils with a vertical uncoiling axis. The outside diameter is 1600 mm, and the inside diameter ranges from 850 to 1000 mm, with a nominal weight of 4100 kg (maximum 5 tons). Coils are packed with plastic strips and underlying cardboard, with additional protection for different sizes using plastic covers.

Requirements:
The document specifies tolerances for diameter, elongation, and resistivity for each dimension. For example, the 8.0 mm rod has a diameter tolerance of ±0.4 mm, a minimum elongation of 30%, and a maximum resistivity of 17.24 nWm. The density of the material is 8.93 kg/dm³.

References:
The document references EN 1977, which pertains to copper and copper alloys, specifically copper drawing stock.

Miscellaneous:
A thin layer of drawing oil can be applied if the wire rod is to be drawn.