EK SPEC 114 ELCOROD for extrusion

Product catalog summary

Document Overview: This document outlines the specifications and requirements for ELCOROD, a product designed for extrusion by Elcowire AB.

1. Specifications:

Dimensions: Available in 12.4, 15.6, and 19.6 mm.
Qualities: Suitable for continuous rotary extrusion.
Form of Delivery: Delivered in tight wound coils with weights of 4000, 5000, and 5600 kg. The height of coils (excluding pallet) ranges from 840 to 860 mm.
Coil Dimensions: Inside diameter is 780 mm, while outside diameters vary from 1290 to 1440 mm depending on weight.
Uncoiling: Recommended to use a turntable for uncoiling.
Packing: Minimum of 3 pieces of 25 mm broad plastic strips and a plastic cover. Pallets are wooden, measuring 1200x1350 mm with a height of 144 mm.

2. Requirements:

Specifications: The product adheres to ASTM B49 and EN 1977 standards.
Designation: Includes C11000 ETP, C11040, ETP CW 004A, and ETP1 CW 003A.
Resistivity: Maximum of 17.24 nWm.
Elongation: Minimum of 30%, though not measured regularly.
Tolerance of Diameter: ± 0.38 to ± 0.4 mm.
Oxygen Content: Ranges from 100 to 650 ppm.

3. References:

ASTM B49: Copper Redraw Rod for Electrical Purposes.
EN 1977: Copper and copper alloys – Copper drawing stock (wire rod).

4. Miscellaneous:

Products are marked with orange labels for identification.

Catalog excerpts

EK SPEC 114 ELCOROD for extrusion 1 Dimensions Suitable for continuous rotary extrusion. Tight wound coils. Weight. kg 4000 5000 5600 Height. (excl. pallet) 840 - 860 mm Inside diameter. mm 780 780 780 Outside diameter. mm 1290 1380 1440 Uncoiling with turntable is recommended. Packing: min 3 pcs 25 mm broad plastic strips and plastic cover. Pallet: Wooden pallet 1200X1350 mm, Height 144 mm. 4 Requirements Specification Designation ASTM B49 EN 1977 EN 1977 C11000 ETP ETP CW 004A ETP1 CW 003A C11040 max 17.24 max 17.24 max 17.07 Resistivity (nWm) min 30 min 30 min 30 Elongation (%) 1) ± 0.4 ± 0.4 Tolerance of diameter, mm ± 0.38 100-650 100-400 100-400 Oxygen content, ppm 1) We fulfil the requirements of elongation, but we don´t measure it regularly 5 References ASTM B49 Copper Redraw Rod for Electrical Purposes EN 1977 Copper and copper alloys – Copper drawing stock (wire rod) Marked with orange labels. Author: Documentno: Elcowire AB, Box 914, 251 09 Helsingborg, Sweden, Tel +46 (0)42 19 53 00, www.elcowire.com, VAT No. SE556027205501, Org.nr 5560272

Open the catalog to page 1

EK SPEC 114 ELCOROD for extrusion

EK SPEC 114 ELCOROD for extrusion

Catalog excerpts

All Elcowire Gmbh catalogs and technical brochures