SC 11 High Voltage Power Unit, 7 Kv source, for ELCOWA anti static ionizing equipment SC 11 To correspond with the different requirements and applications in industry, this generator comes in several versions and may receive different options. This version is equipped with terminal blocks for power supply and high-voltage connections to guarantee an increased degree of protection (IP 65). It is delivered in its basic version in a brushed stainless steel box, and is fitted without a composite mains supply. This generator may be fitted with an auto test system that continuously monitors the presence of high voltage. The indicator light shows the correct operation of the anti-static installation at a glance. A built-in relay allows this inspection to be completed by a sound or light signal or even better, to control machines on / off. • Robust • High performance • Ionization control • Tested and approved • 2 or 4 output (Option) • Auto test • Quick delivery Data sheet High Voltage Power Unit, 7 Kv source, for ELCOWA anti static ionizing

Presentation Dimensions Protection index: Supply voltage Supply connection: Nominal output voltage Output voltage under load Output amperage Consumption High voltage connection In intermittent operation, maximum frequency Limits of use Brushed stainless steel 177 x 255 x 107 mm IP 65 230 V - 50 Hz Electrical terminal 5 kV 7 kV AT 8 mA 40 VA Terminal block Weight OPTIONS • High voltage outputs • Supply voltages 10 blows per minute 115V - 60Hz: 4 meters (Active part + shielded cable) 230V - 50Hz: 8 meters (Active part + shielded cable) 8.5 kg Recommended ionizing equipments Bars ECA 11 B and ECA...