ECA 11 B Capacitive Bar ECA 11 B, working distance up to 120 mm The first generation bars have their ionizing components directly connected to the high voltage. This new type of bars calls upon the accumulation of capacitive loads at the level of each point. The corona effect is obtained as soon as the capacity is saturated. The advantage of the procedure is to avoid disturbances caused by accidental contact with the switched-on bars. These bars are compact and small, and are easily installed in all equipment. Practically indestructible when connected to a high voltage generator, they have an excellent ionic yield and remarkable efficiency. A U-shaped aluminum profile holds an insulating bar, through which passes a highly insulated high voltage cable, in which the ionization points are inserted. The ionizing effect is particularly efficient because of an optimal ratio between points, insulation material and the bar earth. The various components have been designed with the greatest care and selected to avoid any untimely deterioration. • High performance • Robust • Recognized reliability • Standard version under aluminum profile (optionally in stainless steel) • Making to measure and quick delivery • Secure ionisation points (shockless) Data sheet Static Elimination / Anti-Static Capacitive Bar, working distance 12

TECHNICAL DATA Working distance Active part Body Ionization points Insulation Cable Operating voltage Operating temperature Power units Connection Limits of use 120 mm max. section: 15 x 18 mm length: 50 to 6000 mm. anodized aluminum stainless steel polycarbonate metal shielded, axial output, 3 m 7 Kv AC 0-55°C SC 11 B easy high voltage connector 115V-60Hz: 4 meters (active part + cable) 230V-50Hz: 8 meters (active part + cable) Elbow output (Type A, B, C or D) ^ Body in stainless steel Cable up 10 m This equipment must not be used in an inflammable or explosive environment! The bar and the power...