DS
6Pages

Guidance’s The Elcon DS is supplied with a hardened steel shaft for the horizontal guidance. This provides an almost friction free course of the saw beam. As with the bottom beam, the heavy duty mid fence has an end stop. This prevents the slipping of the panel when cutting horizontally. Pneumatic lifting rollers The bottom beam can be supplied with pneumatic lifting rollers. This makes it easy to move heavy material and prevents any damage to the machine and operator. Digital read-out The cutting height and length can be read electronically. This feature also enables the resetting of the display after cutting the top side of a panel, the nett width of the strip can then be read easily and accurately. Frame A fully self-supporting construction with torsion-rigid carrying modules is the basis for the steel length guidance shaft. The tension free guidance ruler guarantees an accuracy within 0,1 mm/m. The hardened steel bar ensures a very long life.

When cutting horizontally at the highest position: +160 mm. Extra space to the right: +300 mm. Special sizes on request. Features of the DS ■ Integrated operating handles at two heights ■ Possibility for cutting out rectangles ■ Easy access to saw blade ■ Fault diagnostics Family features across the Eicon range ■ Unique long life guidance for saw beam ■ Super silent motor housing with insulation ■ Safety: CE tested, Micro switch security, “Tilt” switch ■ Precision: 0,1 mm/m (DIN 875/1) ■ Construction: robust modular welded frame, heavy cast iron flip stop, on solid steel axis PO Box 72 2450...

The DS: not only for wood.ELCONj SAWING TECHNOLOGY

...also for plastic and aluminum The DS models are equipped with all the functions needed for professional use when also working with plastic and aluminium panels. In addition to these functions there is a wide choice of accessories, including a scoring unit and a V-grooving attachment. Limpio-dust collection system Limpio: clean, efficient and unique The patented Limpio-dust extraction system collects the dust directly at the source, both from the front and on the back side of the panel. The saw-blade runs in an almost completely closed area with the dual extraction points removing the...

The Limpio system can be supplied in two versions. The picture below is an example of a DS with a full Limpio dust tray. A moving back support grid is superfluous as the Limpio dust tray protects the full rear side of the machine against any accidental damage caused by cutting into it with the saw blade. A combination of the two systems is the semi Limpio version (see top picture), where the Limpio dust tray is limited to above the mid-fence. This means that the saw beam is always free for horizontal movement and is not limited by the prominent position of the mid fence. Therefore cutting...

Measuring stop with optional extension The robust flip stop (with fine Scoring is not only possi- meter solid guidance shaft, ring unit, but also with the can be equipped with a square main blade. With double- stop-extension providing addi- tional panel support. the panel is scored with a reduced saw blade plunge while positioning the head for the main cut (I). Then, the saw blade is plunged fully into the panel and the cut is completed (II). V-Grooving This option includes tracking rollers and a V-grooving disc and enables the procesplastic panels like Corian. Repeat stop for strips The...