blasting equipmentElcometer blast machines are available in a range of easy-to-order kits to get you up and running as quickly and easily as possible.Blast Kit 1 ■ Elcometer Abrasive Blast Machine ■ RCV 4000+ Remote Control Valve with Silencer, Exhaust & Safety Petcock ■ 20m1 (65.6ft) Pneumatic Control Hose with Deadman's Handle (DMHII) ■ Air Manifold ■ Choke Valve and Pusher Line ■ Abrasive Metering Valve & Metal Pot Coupling ■ Hard Wearing Mixer T2 ■ Pressure Test Certificate ■ Moisture Separator Personal Protection Kits All of Blast Kit 1 plus: ■ 20m1 (65.6ft) 1%" (32mm) ID Blast Hose Assembly complete with Cast Iron Coupling and Nylon Nozzle Holder Elcometer offers a full range of personal protection & operator safety equipment including blast helmets, blast suits, capes and gloves, breathe air filters and breathe air hose. 2 When fitted with a GV & AGV Media Valve

blasting equipment tough 2 pack epoxy multi-coat paint for corrosion protection. Heavy Duty Construction and engineered by Elcometer experts. Every aspect of an Elcometer Blast Machine uses high quality components, is manufactured to an ELCOMETER ENGINEERED High Flow Pipework & Valves Large bore 38mm (1½") and minimal pressure loss. Concave Dishes Fast Flow Cones 45/90° cone to maximise Remote Control Valves handle, the 1½” (38mm) remote control valve Precision Metering Valves Range of precision metering valves offer accurate control of your shuts the blast system Exhaust Manifolds Moisture Separators...

blasting equipment Hard-wearing Mixer T’s Machined out of a single block of high grade machine steel, the Serviceable Exhaust T’s When a blast machine exhausts, it can quickly Mixer T is designed to last. and maximise lifetime. The adjustable height to prevent abrasive escaping the blast Large Inspection Access Large, easy to remove access doors to make maintenance easier and faster. up valve is engaged keeping you safe. Reinforced Pop Up Valves The heavy duty internal pop up valve is long lasting and quickly responds to pressurisation. Narrow & Protected are protected, even transportation. Flexible...

blasting equipment “Every detail of an Elcometer blast machine has been engineered to be safe, last longer and work harder; dependability you can trust.” SAFE & RELIABLE Rugged, reliable and easy to use, Elcometer blast machines & valves tested to be

■ Excellence Is Our Standard Designed and manufactured at our purpose built production facility in Manchester, England, Elcometer blast machines are CE approved, fully tested and certified to International Standards PED 2014/68EU. ■ Built to Last Manufactured out of heavy duty 6mm (%”) steel with double weld seams and with a tough marine specification multi-coat anti-corrosion paint, Elcometer blast machines exceed CE/PED Standards to maximise their lifespan. ■ Putting You in Control Elcometer's state-of-the-art RCV4000 & RCV4000+ Remote Control Valves allow you to safely control the blast machine...

elcometec Productivity is a function of pressure and air flow. "For every psi at the nozzle above 100psi (7bar) you get a 1.5% increase in productivity." ENHANCE YOUR PERFORMANCE Optimising the volume, speed and pressure of air to the nozzle results in greater blasting efficiency. Higher pressure and speed of air at the nozzle will also allow use of a larger nozzle size, resulting in faster blast area coverage, allowing you to cover more in less time. Operating at more efficient blast pressures will also result in less abrasive usage thus saving money and clean up time!

blasting equipment ■ Minimise Your Pressure Loss The design of your blast machine together with your blast hose diameter, length, age, wear and quality can effect the pressure at the nozzle. This is why we manufacture blast machines which have a maximum working pressure of either 12 or 15bar (174 or 217psi), and have been engineered for minimal pressure loss - so that you will always have the nozzle pressure you need to maximise your productivity. ■ Maximise Your Cubic Air Flow Per Minute With an internal pipe diameter of 1^" (38mm) across our blast machines we have optimised the volumetric flow...

blasting equipment blast machines are engineered to faster to maintain. “Greater pressure at the nozzle lets you work faster as every 1psi (0.07bar) above 100psi (7bar) equals 1.5% productivity increase.”

■ Quick and Easy Whilst Elcometer pop up valves come with reinforced metal guards so that they last longer, when they need to be replaced you can do so quickly and easily thanks to the large access doorway which is wide enough for both of your arms. As each door comes with an ElcoFit™ wraparound sealing gasket, you don’t even have to worry about gasket alignment. ■ Maintenance in Minutes Maintenance is always required to prolong the service life of your blast machine. To minimise your downtime, the remote control valve, exhaust, silencer and moisture separator can be quickly swapped out in one...

elcometec Whether you are blasting at a dockyard or in a blast room, Elcometer offers a range of blast machines, from 20 up to 285 litres (0.7 - 10.06cu ft), available with 12bar (174psi) working pressure to maximise productivity. Model Options

blasting equipment Elcometer standard blast machines are CE approved and fully tested and certified to PED 2014/68EU with a maximum working pressure of 12bar (174psi).

The Elcometer 1020 is a 20 litre (0.70cu ft) 10" Portable Abrasive Blast Machine ideal for small blasting applications and touch up work. Ideal for touch-up applications and spot -• blasting Compact, low profile size _ is easy to fill with abrasive Heavy duty wheels are ideal for manoeuvring in -• small spaces Available with a range of media valves to suit your • application

blasting equipment elcometec Kit Selection Part Numbers Elcometer Blast Machine Kits are available with: Mini Flat Valve (MF) Mini General Valve (MG) 10" 20 litre (254mm 0.70cu ft) Abrasive Blast Machine Pressure Test Certificate RCV4000+ Remote Control Valve with Air Manifold, Exhaust & Silencer 10m (32.8ft) Pneumatic Control Hose & Deadman's Handle (DMHII) Choke Valve and Pusher Line Abrasive Metering Valve with Flanged T1 and Metal Pot Coupling Moisture Separator 10m 13mm (32.8ft, V2”) ID Blast Hose with Cast Iron Hose Couplings & Nylon Nozzle Holder Externally Mounted Sieve and Lid Elcometer...