PG70ABDL Precision Thickness Gauge Range of display options: A-Scan, B-Scan, Pulse-Echo, Echo-Echo Adjustable gain: -30dB to 70dB range Automatic gain control (AGC) User definable setups Multiple language display Multiple calibration and material selection options High speed scan: 32 readings per second Differential mode Minimal thickness alarm Data output and storage: 12,000 readings and waveforms ElcoMaster® data management software PG70ABDL offers inspectors a graphical representation of the material’s thickness with greater precision. With a user selectable resolution of either 0.01mm or 0.001mm (0.001/0.0001 inch) the PG70ABDL can display the thickness value together with A and B-Scan displays, providing users with the ability to accurately assess a wide range of materials. The auto find feature locates the detection point(s) and adjusts the display settings to bring the waveform into view. The high speed scan feature speeds up the inspection process by taking 32 measurements per second. Remove the transducer from the test material and display the minimum measurement scanned. Visual and audible alarm with high and low limit settings for specific application tolerances. For a full range of transducers, please refer to the Single Element Transducers data sheet. PG70ABDL Display Modes Explained Material Thickness Digits Display: The standard display on all models, this displays the numerical thickness value in either millimetres (MM)or inches (IN). Scan Bar Display: A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses. B-Scan Display: A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis. A-Scan Display; Full Wave (RF): The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed. A-Scan Display; Rectified (+ or -): Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified(RECT) display shows the amplitude of the echo versus the transit time. © 2016 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without noti

1 PE: Pulse-Echo Mode, EE: Echo-Echo (ThruPaint™) Mode, IE: Interface - Echo Mode 2 Measuring range & accuracy depends on material, surface conditions and the transducer selected © 2016 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.