Elcometer FD700 Flaw Detector

NDT Inspection Equipment Elcometer FD700 Mini Flaw Detector The hand-held Elcometer FD700 flaw detector range combines state-of-the-art flaw detection with advanced material thickness capabilities. Automatic: probe zero, probe recognition, and temperature compensation Measurement: Variety of modes to address a number of applications Large data storage with multiple formats: Alpha numeric grid and sequential with auto identifier Compatible with ElcoMaster® PC for instant report generation and firmware updates compatible with Pulse Repetition Frequency: 8 to 2000Hz, adjustable

NDT Inspection Equipment Elcometer FD700 Mini Flaw Detector Detection Methods Two gauges in one The FD700 series has two functions, a thickness gauge and a flaw detector. When the FD700 is set to thickness gauge it has the ability to measure coatings and material thickness simultaneously. When set to flaw detector the gauge has the ability to detect the size and position of flaws and to differentiate between flaw types in various materials and welded joints. User definable limits for pass/fail indication Set hi/lo limits for pass/fail indication with audible warnings and built-in differential...

NDT Inspection Equipment Elcometer FD700 Mini Flaw Detector Material Thickness Product Features FD700+ & FD700DL+ Model & Part Number Display Mode Material thickness digits display B-Scan cross sectional display B-Scan with digits display Coating thickness display A-Scan display + Rectified, - Rectified, Full Waveform (RF) Flaw detection modes TRIG, DAC, AWS, AVG/DGS, TCG PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT Measurement Mode Measurement Rate (Thickness Mode) Manual Scan Mode Additional Features: High Speed Scan Mode Differential Mode Limit Alarm Mode B-Scan...

NDT Inspection Equipment Elcometer FD700 Mini Flaw Detector Flaw Detection Product Features Automatic Calibration: Longitudinal (straight), or Shear (angle) Probe Types: Single Contact, Dual, Delay & Angle Material Velocity Table: Contains longitudinal and shear velocities for a variety of material types Trigonometric display of beam path, depth, surface distance, and curved surface correction. Used with angle beam transducers Up to 8 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, (-6/-12), (-6/-14), (-2/-6/-10) dB. Amplitude displayed in %DAC, dB, or %FSH...

NDT Inspection Equipment Elcometer FD700 Mini Flaw Detector Technical Specification Certificate Part Number Elcometer FD700+ Mini Flaw Detector Elcometer FD700DL+ Mini Flaw Detector Transducer Probe Type Single & Dual Element Thickness Gauge: Measurement Range1 Pulse Echo (PE) Pulse Echo (single contact) Echo Echo ThruPaint (EE) Echo Echo (single delay line) Echo Echo (single contact) Echo Echo Verify (EEV) Pulse Echo Temp Comp (PETP) Pulse Echo Coating Thickness (PECT) Pulse Echo Coating Thickness (PECT) Measurement Accuracy Operating Temperature Data Output Power Supply Battery Life Alkaline...

NDT Inspection Equipment Elcometer FD Suitable for: Single Element Transducers Single Element Transducers are the common 0° transducers and are ideal for inspecting large, simple geometry materials. Probe Diameter Probe Characteristic Disk Part Number Microdot Lemo BNC Top Side End Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium All Metals Common Metals Rough Surfaces Castings Billets Extruded Parts Weld Inspection Weld Inspection (Tight Areas) Connector Type 1.00MHz Single Element Contact Transducers 3.50MHz Single Element Contact Transducers TF3M50E-1...

NDT Inspection Equipment Elcometer FD Suitable for: Shear Wave Transducers Shear Wave Transducers are designed to be used with angle beam wedges. The transducer is secured to the wedge with screws. For standard and dual shear wave transducers visit www.elcometer.com. Weld Inspection (Tight Areas) Cast Iron Plastics Thin Plastics Fibreglass Thin Fibreglass Steel Glass Aluminium Titanium All Metals Common Metals Corrosion Prove Up Castings Billets Extruded Parts Weld Inspection Probe Characteristic Probe Diameter Disk Part Number 1.00MHz Shear Wave - Quick Change Transducers TF1M00CG 2.25MHz Shear...

NDT Inspection Equipment Elcometer FD Transducer Wedges A range of versatile wedges available in 45°, 60° and 70° angles for use with Elcometer shear wave quick change transducers. For transducer wedges suitable for standard and dual shear wave transducers visit www.elcometer.com. Wedges - Standard Quick Change Transducers Part Number Probe Diameter Shear Wave Contact Transducers Wedge - Standard Quick Change Transducers Part Number Probe Diameter 4.00 MHz Shear Wave Contact Transducers Cables & Adaptors Part Number T/Cable: 1.2m (4') Single Lemo 00 to Lemo 00 T/Cable: 1.2m (4') Single Lemo 00...

Elcometer Limited Tel: +44 (0)161 371 6000 [email protected] www.elcometer.com Elcometer KK Tel: +81-(0)3-6869-0770 [email protected] www.elcometer.co.jp REPUBLIC OF SINGAPORE Elcometer (Asia) Pte Ltd Tel: +65 6462 2822 [email protected] www.elcometer.com UNITED ARAB EMIRATES Elcometer LLC Tel: +971 4 295 0191 +971 4 280 3526 [email protected] www.elcometer.ae © 2023 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications...