Catalogs >
Elcometer >
Elcometer - Flow Cups

Elcometer - Flow Cups
1 / 6Pages

Catalog excerpts

1 Viscosity - Flow Cups

Viscosity - Flow Cups Viscosity Flow Cups Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products. The measured kinematic viscosity is generally expressed in seconds(s) flow time. If the Standards stipulate conversion methods the flow time can be converted into Centistokes (cSt) using the Elcometer ElcoCalc™ Mobile App. Calibration certificates which offer traceability and assurance that each viscosity cup has been individually tested and comply to Standards are...

Open the catalog to page 2

Viscosity - Flow Cups Viscosity Flow Cups Technical Specification ISO Viscosity Flow Cups Orifice Diameter Elcometer 2353/1 with calibration certificate Elcometer 2353/2 with calibration certificate Elcometer 2353/3 with calibration certificate Elcometer 2353/4 with calibration certificate Elcometer 2353/5 with calibration certificate Part Number FORD/ASTM Viscosity Cups Part Number Orifice Diameter Elcometer 2351/1 FORD/ASTM Viscosity Cup 1 Elcometer 2351/2 FORD/ASTM Viscosity Cup 2 Elcometer 2351/3 FORD/ASTM Viscosity Cup 3 Elcometer 2351/4 FORD/ASTM Viscosity Cup 4 Elcometer 2351/5...

Open the catalog to page 3

Viscosity Cups Viscosity Cup Conversion compatible with The table below lists the major flow cup types together with a conversion chart of Efflux Time (in seconds) to Viscosity in Centistokes (cSt). It has been constructed from the various International Standard Calculators. Each cup design is unique, care must be taken when comparing viscosity values between different cup types. These values are the absolute values and do not include the allowed tolerances, as these differ considerably between each of the Standards. Viscosity Cup Type Time (seconds) All measurements are in Centistokes...

Open the catalog to page 4

Viscosity - Flow Cups Viscosity Flow Cup Accessories Viscosity Cup Stand with Bubble Level and Glass Draw Plate Viscosity Cup Precision Stand with Bubble Level and Glass Draw Plate Bubble Level for Viscosity Cup Viscosity Glass Draw Plate Viscosity Cup Precision Stand with Thermojacket Thermojacket for Viscosity Cup Precision Stand Elcometer 7300 High Precision Stopwatch Elcometer 2400 Conversion Disc To ensure the viscosity cup is positioned correctly to carry out the test. To ensure the viscosity cup is positioned correctly to carry out the test. To ensure the viscosity cup is parallel to...

Open the catalog to page 5

Viscosity - Standard Calibration Oils Elcometer 2410 Elcometer Viscosity Cup Standard Calibration Oils In order to check the viscosity cup’s calibration or to certify it for ISO purposes, it is imperative that viscosity cup standard calibration oils are used. Standard oils have a specific drain time, dependent upon the viscosity cup type (Ford, Shell, Zahn etc.) and the orifice or cup number used. To check the viscosity cup, use the standard viscosity oils in place of the liquid and measure the drain time. Specific calibration oils can only be used with specific flow cups. Please use the...

Open the catalog to page 6

Elcometer - Flow Cups 1 / 6Pages

Catalog excerpts

All Elcometer catalogs and technical brochures

Elcometer - Flow Cups
1 / 6Pages