*mydirectindustry

Catalogs
Elcometer
Elcometer 5100

Elcometer 5100

Product catalog summary

Introduction
The Elcometer 5100 Payne Permeability Cups are designed to measure the permeability of films such as paints, varnish, plastic, and cellophane. These cups are constructed from anodised aluminium and are used to determine the degree of permeability by calculating the weight change relative to film thickness over time.

Technical Specifications

Standards: ASTM D1653, ASTM E96, ISO 7783-1, ISO 7783-2
Part Numbers and Descriptions:
- K0005100M201: 10 cm² (1.55 inches²), 15 cm³ (0.91 inches³)
- K0005100M202: 30 cm² (4.65 inches²), 50 cm³ (3.05 inches³)
- K0005100M203: 30 cm² (4.65 inches²), 75 cm³ (4.58 inches³)
Packing List: Includes the Elcometer 5100 Payne Permeability Cup, storage case, and operating instructions.

Accessories

Leneta Chart RP-1K: Dimensions 219 x 286 mm (8.62 x 11.26 inches), 250 per box.

Usage Instructions

Fill the cup with the required liquid (typically water) or a dry desiccant.
Disassemble the permeability cup.
Place the film onto the cup and reassemble, ensuring the gasket is fitted first.
Weigh the prepared permeability cup and record the result in grams.
Leave for the appropriate time, re-weigh, and calculate the change in mass (∆m) and water vapour transmission rate.
Prepare the film to be tested using a film applicator and suitable test chart.

Note: For use with Elcometer 8720 compact balance.

Catalog excerpts

Elcometer 5100 Payne Permeability Cups The Elcometer 5100 Payne Permeability Cups are made of anodised aluminium and are used to determine the permeability of films of paints, varnish, plastic, cellophane, etc. The water evaporates or is absorbed and, after a certain time, the weight change relative to the film thickness is calculated, indicating the degree of permeability or permeance. Technical Specification How to use Payne Permeability Cups © 2015 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.

Open the catalog to page 1

All Elcometer catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list