elcometecinspection equipment Elcometer 410 Wind Speed Anemometer The Elcometer 410 Anemometer is a portable, pocket size instrument for taking accurate readings of wind speed. The lightweight impeller with high precision jewel bearings provides very accurate airflow measurements even at low speeds. The impeller can easily be replaced without the need to return the unit to Elcometer. The wind speed can be displayed in various measurement units; indicating current speed, maximum speed or average speed. Technical Specification Part Number Description Measurement Units Operating Range Specification Range On-axis Accuracy Off-axis Response Calibration Drift Resolution Operating Temperature Storage Temperature Power Supply Battery Life Auto Switch Off Dimensions Packing List Current wind speed (3 second average) Average speed since power on (AVG) Maximum 3 second gust since power on (MAX) Data Hold Knots (kt), metres per second (m/s), kilometres per hour (km/h), miles per hour (mph), feet per minute (ft/min) and Beaufort Force (B) 0.4m/s to 60m/s (0.8 to 135.0mph) 0.4m/s to 40m/s (0.8 to 89.0mph) ±3% of reading or least significant digit, whichever is the greater -1% at 5°, -2% at 10°, -3% at 15° <1% after 100 hours operation at 7m/s 0.1 kt, m/s, km/h, mph. 1 ft/min below 1999 ft/min, 10 ft/min above 2000 ft/min. 1 Beaufort (0 to 12) -10°C to +55°C (14°F to 131°F) -30°C to +60°C (-22°F to 140°F) 1 x CR2032 battery Approximately 300 hours 45 minutes after last key press Instrument Only: Instrument and Protective Cover Instrument Only: 65g (2.3oz) Instrument and Protective Cover: 102g (3.6oz) Elcometer 410 Anemometer, protective cover, lanyard, 1 x CR2032 battery and operating instructions. © 2017 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.