Dispersion & Density Elcometer 2050 High Precision Grindometer This single channel precision gauge is used to determine particle size and fineness of grind for many materials including paints, pigments, inks, coatings, chocolates and other similar products. Manufactured out of hardened stainless steel each gauge is graduated in microns on the top to an accuracy of ±3μm (0.12mil) or ±5% whichever is the greater. The groove width is 12mm (0.47”) and the groove length is 200mm (7.87”). The High Precision Grindometer has a single groove. STANDARDS: ASTM D 1210, AS/NZS 1580.204.1 DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046 Technical Specification Part Number Metric Range (mils) Graduation (mils) Packed Dimensions Packed Weight Packing List Elcometer 2050 High Precision Grindometer, scraper, plastic case and operating instructions Replacement Scraper for Elcometer 2050 ○ Optional Calibration Certificate available. © 2019 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without noti