Dispersion & Density Elcometer 2020 Fineness of Grind Gauges The Elcometer Fineness of Grind Gauges are used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products. These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen). Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have a accuracy of ±3μm (0.12mil) or ±5% whichever is the greater. The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”). STANDARDS: ASTM D 1210, AS/NZS 1580.204.1 DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046 Technical Specification Part Number Metric Hegman Paint Club Certificate (NS or H) (PCU) Packed Dimensions Packed Weight Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions Replacement Scraper for Elcometer 2020 How to use a Fineness of Grind Gauge The material is placed on the deepest part of the groove and, using the scraper provided, drawn up the slope - the particle size is indicated where the material stops. ○ Optional Calibration Certificate available. © 2019 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.