Catalog excerpts
Washability & Abrasion Washability & Abrasion Testers 1
Open the catalog to page 1Washability & Abrasion Testers These robust, reliable and extremely versatile machines have been designed for testing the washability, brushability and resistance of a wide range of materials including paint, lacquers, inks, coatings, leather, wood, plastics, printed material, fabrics etc. Test up to 4 samples simultaneously User adjustable stroke length from 10 to 300mm (0.4 to 11.8”) Rapid tool change Multi-lingual digital display Available with or without an integrated liquid dosing pump The durable and robust design is stable under test allowing repeatable results, even at the fastest...
Open the catalog to page 2Elcometer 1720 Meeting Standards • With the wide range of tools available many Standards can be tested in one unit • All units can be used in accordance with ASTM, DIN, EN and ISO Standards • Easily adjustable to customers unique applications using the special tools • Washability and abrasion testing on flat and curved samples up to 13mm (0.51”) thick Interchangeable Tools • All tools are interchangeable with the rapid tool change system, making the unit ideal for use in accordance with a wide range of Standards For the complete range of tools, see page 19-5 User Adjustable • Stroke length...
Open the catalog to page 3Washability & Abrasion Elcometer 1720 Washability & Abrasion Testers Test up to 4 different samples simultaneously. Stroke speed can be varied between 10 and 65 cycles/min or set to 37 cycles/min to meet ISO Standards. Stroke length can be adjusted by the user to meet specific requirements, from 10 to 300mm (0.4 to 11.8”). Available with or without liquid dosers, allowing test liquids to be regulated automatically or independently. Digital display allows easy, accurate speed variation and simple reporting. The rapid tool change system allows the user to test the samples in accordance with a...
Open the catalog to page 4Washability & Abrasion Washability & Abrasion Testers The Elcometer 1720 can undertake tests according to a wide range of different Standards and Test Methods by simply changing the abrasive tools. For more information on Standards, please see section 23. Please select the required tools from the list on the following two pages. Samples can be tested in a combination of both wet and dry methods. Tool 1: Wild Boar Brush Tool 2: Nylon Brush Wild boar hair brush and stainless steel brush holder. Total weight: 250g (8.82oz) Nylon bristle brush, stainless steel brush holder and 177g (6.2oz)...
Open the catalog to page 5Tool 9: Linear Abrader For testing the resistance to abrasion of automotive components, includes a felt disc of 10mm (0.4”) diameter and 10mm (0.4”) thick working under a mass of 400g (14.1oz). Total weight: 400g (14.11oz) Part Number: KT001720P075 Tool 9B: Linear Abrader Felt holder for 16mm (0.63”) diameter felt wool disc working under a mass of 900g (31.7oz) Total weight: 900g (31.74oz) Part Number: KT001720P075-2 Tool 10: Curved Sample Tool Height adjustable with an elbow joint for curved samples, this tool is ideal for testing abrasion resistance of both coatings and inks. Supplied...
Open the catalog to page 6Elcometer 4695 In a typical scrub test, the coating is applied to the Leneta Scrub Test Panel at a specified film thickness, allowed to dry and then subjected to scrubbing with a straight-line scrub tester. When used in accordance with ASTM D2486, Method A, a 10mil shim is inserted under the panel to accelerate failure and thereby reduce testing time. The scrub resistance is the number of scrub cycles required to remove the coating to a specified end point. Alternatively, the loss in weight is determined after a specified number of scrub FormF^^^M resistance cycles, with calculation of...
Open the catalog to page 7elcometec wvsAv.elcorneter.corri © Elcometer Limited, 2019. All rights reserved. No part of this document may be reproduced, transmitted, stored (in a retrieval system or otherwise), or translated into any language, in any form, or by any means, without the prior written permission of Elcometer Limited. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.
Open the catalog to page 8All Elcometer catalogs and technical brochures
-
Elcometer 147 Weld Gauge
1 Pages
-
Elcometer - Flow Cups
6 Pages
-
Elcometer 510
11 Pages
-
FD700 Mini Flaw Detectors
10 Pages
-
Blasting Inspection Kits
1 Pages
-
portable blast machines 12bar
15 Pages
-
ElcoMaster® Mobile App
12 Pages
-
Elcometer 119 Pit Gauge
1 Pages
-
Automotive Inspection Kit
1 Pages
-
Blast Nozzle Gauge
1 Pages
-
blasting equipment
3 Pages
-
Elcometer 130
6 Pages
-
Elcometer 6910 Flashpoint
5 Pages
-
Elcometer 500
8 Pages
-
Blasting Inspection Kits
1 Pages
-
Digital Inspection Kits
1 Pages
-
Elcometer UV
1 Pages
-
Elcometer FV
6 Pages
-
Elcometer GV
10 Pages
-
Elcometer AGV
7 Pages
-
Elcometer 210
1 Pages
-
Elcometer 280
1 Pages
-
Digital Inspection Kits
1 Pages
-
Elcometer - Test Charts
6 Pages
-
Elcometer 4270 - Sag Tester
1 Pages
-
Elcometer 480 - Glossmeters
12 Pages
-
Elcometer 7410
2 Pages
-
Elcometer 5100
1 Pages
-
Elcometer 1537
1 Pages
-
BG80 Bolt Tension Monitors
2 Pages