Elasticity & Deformation Variable Impact Tester 1

Elasticity & Deformation Elcometer 1615 Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for use on both direct and indirect test methods. Direct: either a weight with a hemispherical punch attached falls on to a coated metal sheet. Indirect: a weight falls on to a hemispherical punch which is resting on the coated metal sheet. The Elcometer 1615 Impact Tester comes as one universal assembly with the option of seven different kits providing the functionality for various testing methods....

Variable Impact Tester Variable Impact Tester Kits The Elcometer 1615 Variable Impact Testers are designed to meet a wide range of National and International Standards. Simply select the appropriate kit from page 4 and attach the punch, die and accessories to the base unit. Interchangeable dies - enable the user to match the die to the size of the relevant punch to conform to the required Standard or method. Please see page 4 for the list of available kits and page 6 for the full range of accessories Technical Specification Part Number Description K0001615M201 Elcometer 1615 Impact Tester Universal...

In order to test a sample in accordance with a specified standard, a number of kits have been created to provide a single Impact Tester which, by using the appropriate kit, allow the user to work in accordance with a wide range of National and International standards. Part Number Description Certificate KT001615KITA Elcometer Impact Tester Kit A o Kit A: Falling 1kg (2.2lb) weight with a 20mm (0.79”) punch; 27mm (1.06”) die with fixing screw; sample clamp with two fixing screws; stop collar*; 3mm (0.12”) and 4mm (0.16”) hexagonal wrench Part Number Description Certificate KT001615KITB...

Elcometer 1615 Part Number Description KT001615KITE Elcometer Impact Tester Kit E Kit E: Falling 400g (0.9lb) weight with 23mm (0.90”) punch; 22mm (0.87”) die with fixing screw; 3mm (0.12”) hexagonal wrench Part Number Description Certificate KT001615KITF Elcometer Impact Tester Kit F o Kit F: Falling 1kg (2.2lb) weight with a 20mm (0.79”) punch; 27mm (1.06”) die with fixing screw; Falling 1kg (2.2lb) weight with 12.7mm (0.5”) punch; sample clamp with two fixing screws; 16.3mm (0.64”) die with fixing screw; stop collar*; static indenter with 15.9mm (0.6”) punch; 3mm (0.12”) hexagonal...

Variable Impact Tester Accessories The following range of accessories have been designed to help you evaluate the resistance of a coating to impact (elongation, cracking or peeling) when used in conjunction with the Elcometer 1615 Variable Impact tester. Punches are universal and can be used either fitted to a falling weight or as a punch resting on the sample. © 2015 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice. WWW.elCOmeter.COm...