Catalogs >
Elcometer >
Elcometer 130 - Solube Salt Profiler

Elcometer 130 - Solube Salt Profiler
8Pages

Catalog excerpts

Elcometer 130 - Solube Salt Profiler - 1

Elcometer 130 Soluble Salt Profiler Fast & accurate measurement of soluble salts on surfaces - over 4 times faster than other Bresle equivalent test methods. Complete a Bresle equivalent test in just over two minutes, over 4 times faster than the Bresle method Multi-point conductivity sensors for accurate display of salt concentration Fully portable, rugged hand-held design ideal for use in the field • Store 3,500 readings in 1,000 batches • Displays average & peak salt concentration • 2D & 3D maps display salt profile & pass/fail graphs • 1 Elcometer 130 SSP test is equivalent to 4 Bresle tests • Bluetooth® to PC, iOS & Android™ devices compatible with wireless technology

Open the catalog to page 1

Elcometer 130 - Solube Salt Profiler - 2

The Elcometer 130 soluble salt profiler provides fast and accurate measurement of the level and density of soluble salts - over 4 times faster than other Bresle equivalent methods. BRESLE EQUIVALENT ISO 8502-9 TEST METHOD V_/ Stores up to 3,500 sets of readings in 1,000 alpha numeric batches Automatic temperature compensation ensures accurate results Multi-point conductivity sensor allows the trend in conductivity to be displayed as a density map Large colour LCD screen displays readings in pg/cm2, ppm, pS/cm, mS/cm, % salinity or mg/irP Non-oxidising gold plated contacts ensure...

Open the catalog to page 2

Elcometer 130 - Solube Salt Profiler - 3

Soluble Salt Profiler “Four Bresle equivalent readings in 2½ minutes” Each filter paper is the size of four Bresle patches - the Elcometer 130 Soluble Salt Profiler not only displays the individual reading, but also provides four Bresle equivalent readings in just over two minutes. “The new Elcometer 130 SSP doesn’t just measure the level of soluble salts” In addition to soluble salt levels (cleanliness) or conductivity, the Elcometer 130 SSP carries out a detailed analysis of the test area - providing an accurate salt density profile map, pinpointing areas of high contamination outside...

Open the catalog to page 3

Elcometer 130 - Solube Salt Profiler - 4

Soluble Salt Profiler How to use the Elcometer 130 Soluble Salt Profiler 1. Wearing clean disposable gloves (supplied), fill a syringe with precisely 1.6ml of deionised water. 2. Using tweezers, remove a filter paper from the pack and place it on the cleaned, non-labelled side of the magnetic disc supplied. 3. Disperse the water from the syringe, evenly across the whole of the filter paper and remove any bubbles from under the paper. 4. Place the magnetic disc, with wetted paper face down on to the area under test, pressing firmly into any contours or irregularities and start the 2 minute...

Open the catalog to page 4

Elcometer 130 - Solube Salt Profiler - 5

Soluble Salt Profiler Elcometer 130 SSP Bresle Patch Equivalence Tested under laboratory conditions in accordance with ISO 8502-9, the Elcometer 130 SSP provides equivalent measurements to the Bresle Patch Method. To show equivalency of measurement between the Bresle Method and the Elcometer 130 SSP it is essential that all parameters are identical except the gauges under test. For equivalency to be established, both gauges should read a similar value, taking into account the accuracy and resolution of each test. TEST METHOD Working with the School of Materials at the University of...

Open the catalog to page 5

Elcometer 130 - Solube Salt Profiler - 6

Elcometer 130 SSP Soluble Salt Profiler Create instant reports with ElcoMaster® What you do with the collected data is just as important as taking the readings themselves. ElcoMaster® is a fast, easy to use software solution for all your data management and quality assurance needs, preparing professional inspection reports at the click of a button. Data transferred to ElcoMaster® includes: • Date and time stamped readings • Statistical values • Limit values • Readings above high limit • Run charts & histograms • Salt profile maps • Batch and gauge information • Calibration information...

Open the catalog to page 6

Elcometer 130 - Solube Salt Profiler - 7

Soluble Salt Profiler Technical Specification Repeatable & reproducible measurements Easy to use menu structure; in 30+ languages Tough, impact, waterproof & dust resistant; equivalent to IP64 Bright colour screen; with permanent back light Scratch & solvent resistant display; 2.4” (6cm) TFT 2 year gauge warranty* USB power supply; via PC Calibration certificate Calibration verification mode (with optional certified calibration tile) Ambient light sensor; with adjustable auto brightness Emergency light mode Magnetic & tripod mounting points Data output, USB to PC & Bluetooth to PC, Android™...

Open the catalog to page 7

Elcometer 130 - Solube Salt Profiler - 8

Technical Specification Elcometer 130 Soluble Salt Profiler Elcometer 130 Certified Soluble Salt Profiler Power Supply 4 x AA batteries or via USB (rechargeable batteries can also be used) Battery Life Alkaline: Approximately 30 hours Lithium: Approximately 45 hours Sample Time Sampling Size SSPC Guide 15 (Bresle Equivalent ISO 8502-9 Test Method) Packing List Elcometer 130 Soluble Salt Profiler, 3 x magnetic discs, 100 x high purity test papers, 250ml (8.5fl oz) pure water, 20 x PVC storage bags, disposable gloves, sensor wipes, 3 x 3.0ml (0.1fl oz) syringes, 2 x plastic tweezers, 4 x AA...

Open the catalog to page 8

Elcometer 130 - Solube Salt Profiler 8Pages

Catalog excerpts

All Elcometer catalogs and technical brochures

Elcometer 130 - Solube Salt Profiler
8Pages