Adhesion - Cross Hatch Elcometer 107 Cross Hatch Cutter The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test. • Robust design Large, non slip grip Ideal for thin, thick or hard coatings A quick change, four sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm) The Elcometer 107 Cross Hatch Cutter is available as a Basic or Full Kit. STANDARDS: AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038 Technical Specification Part Number Cutter Type Elcometer 107 Full Kit with ISO Tape Elcometer 107 Full Kit with ASTM Tape Elcometer 107 Full Kit with ASTM Tape Elcometer 107 Full Kit with ISO Tape Elcometer 107 Full Kit with ASTM Tape Packing List Coating Thickness Basic Kit: Robust handle, cutter, hexagonal wrench, presentation storage case and instructions (together with Classification of Adhesion Test Results chart) Full Kit: Robust handle, cutter, hexagonal wrench, instructions (together with Classification of Adhesion Test Results chart), magnifier (x8), brush and adhesive tape (either ASTM or ISO tape), all in a plastic ABS carry case Approximate Thickness ○ Optional Calibration Cert

Adhesion - Cross Hatch Elcometer 107 Cross Hatch Cutter C Accessories Methods Part Number 6 x 1mm Four sided cutter blade 11 x 1mm Four sided cutter blade 11 x 1.5mm Four sided cutter blade 6 x 2mm Four sided cutter blade 6 x 3mm Four sided cutter blade Adhesive Tape (1 roll) ASTM D 3359 Adhesive Tape (1 roll) ISO 2409 Adhesive Tape (2 rolls) ASTM D 3359 Adhesive Tape (2 rolls) ISO 2409 ○ Optional Calibration Certificate available. © 2020 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement,...