Adhesion - Pull-Off Elcometer 106/6 Adhesion Tester for Coatings on Concrete The Elcometer 106/6 Adhesion Tester has been specifically designed to measure coatings on concrete. Operating in a similar way to the regular Elcometer 106 Adhesion Tester, the Elcometer 106/6 uses a 50mm (2”) diameter dolly for testing coatings on concrete. The Elcometer 106/6 is fully portable and supplied in a carry case - making it ideal for on site tests. Technical Specification Part Number Elcometer 106 Coatings on Concrete Adhesion Tester - Scale 6 Packing List Elcometer 106/6 Coatings on Concrete Adhesion Tester, 5 x 50mm (2”) dollies, support ring, Araldite adhesive, ratchet spanner, carry case and operating instructions 50mm (2”) Diameter Dollies (Pack of 5) 50mm (2”) Diameter Dolly Cutting Tool Araldite Standard Two Part Epoxy Adhesive, 2 x 15ml Tubes Coating Adhesion Testing on Concrete Adhesive Failure Partial Coating Failure Coating Failure Concrete Failure ○ Optional Calibration Certificate available. © 2017 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.