Elcometer Blasting Inspection Kits The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles. An Elcometer 456 Gauge and probe can also be supplied. (Order separately if required.) Measurement parameters include: • Surface assessment • Surface profile • Blast equipment inspection • Surface contamination STANDARDS: AS 3894.5, AS 3894.6-A, AS 3894.6-C, AS 3894.6-D, ASTM D 2200, ASTM D 4417-A, ASTM D 4417-B, ASTM D 4417-C, BS 7079-C5, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1, ISO 8502-3, ISO 8502-5, ISO 8502-6, ISO 8502-9, ISO 8503-1, ISO 8503-2, ISO 8503-5, NACE RP0287, SANS 5772, SS 55900, SSPC Guide 15, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000 ''Swedish Rust Standard ISO 8501, SIS055900 supplied in Metric Kit US Standard SSPC VIS 1-01 and VIS-3 supplied in Imperial Kit 2 Supplied with Elcometer 135C Bresle Test Patches (x50) r" ' Part Number Description Metric Imperial YKIT-BLAST-1M YKIT-BLAStTe Elcometer Blasting Inspection Kit 1 YKIT-BLAST-2M_YKIT-BLAST-2E Elcometer Blasting Inspection Kit 2 © 2016 Elcometer Limited. Elcometer is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Due to our policy of continuous improvement, Elcometer Limited reserves the right to chan