*mydirectindustry

Model 59MA

Product catalog summary

Overview: The 59MA Encoder is a robust incremental encoder designed for use on motors, featuring a pass-through shaft and internal tangential coupling. It is manufactured by ELCIS encoder s.r.l. in Italy.

Technical Specifications:

Material: Base made of aluminium, cover of anodized aluminium.
Weight: 340 grams.
Shaft Diameter: 15 to 20 mm, made of stainless steel.
Maximum Load: Radial and axial load up to 8 kg.
Protection Rating: IP ratings according to CEI EN 60529 standards.
Maximum RPM: Continuous max RPM varies between 3000 to 8000 depending on configuration.
Starting Torque: Ranges from 40 to 120 gcm.
Ball Bearings Life: 1.5 billion revolutions.
Impact and Vibration Resistance: 50 G x 11ms and 12 G (10 ÷ 2000 Hz) respectively.
Temperature Range: Operating from 0 to 70°C, storage from -30 to 85°C.
Pulses per Revolution: 1 to 3600.
Max Frequency: 100 kHz, with options up to 300 kHz.
Power Consumption: Standard 120 mA, line driver 180 mA.
Light Source: LED with a lifespan of over 100,000 hours.

Electronics: Various electronic configurations are available, including NPN, PNP, and push-pull options, with different drivers like 26LS31 and TTL 7404.

Options and Customizations: The encoder offers several customization options such as low temperature, unbreakable disk, sealed ball bearings, and high-frequency capabilities. Custom options are also available.

Connections: Multiple connection types are available, including cable output, connector output, and terminal box output, with various configurations for different cable types and lengths.

Ordering Information: The encoder can be ordered with specific configurations for pulses per revolution, power supply, electronic type, connection type, and output type.

Compliance and Warranty: The product is manufactured according to UNI EN ISO 9001:2000 standards, comes with a CE mark, and includes a two-year warranty from the delivery date.

Catalog excerpts

INCREMENTAL ENCODER ENCODER WITH PASS THROUGH SHAFT AND EQUIPPED WITH INTERNAL TANGENTIAL COUPLING. VERY STURDY, IT'S DESIGNED FOR USE ON MOTORS. data sheet . II 127 E0B 59MA Sized draw standard version: Measures without tolerance according to UNI ISO 2768-mk Max joint compensation: axial ± 0,2mm, radial ± 0,05mm, angular ±1° ALUMINIUM (*) ANODIZED ALUMINIUM (*) 340 g Ø 15÷20 PASS.THR.STAINL.ST (*) 8 kg see 'CONNECTION' of page 2 std. 64 sealed 65 low torq. 53 standard Z B 6000 3000 8000 90 120 40 (°) IP according to CEI EN 60529,EN 60529,IEC 529 (*) custom options 1,5 x 10^9 revolutions 50 G x 11ms 12 G (10 ÷ 2000 Hz) (see page 2) 5÷30V 0 ÷ 70 °C (*) -30 ÷ 85 °C 1 ÷ 3600 100 kHz (300 opzione) std 120 line driver 180 (*) LED with >= 100000 h life ELECTRONICS CODE DESCRIPTION K Q R P U B H STANDARD NPN NPN OPEN COLL NPN NPN OPEN COLL PNP PNP OPEN COLL PUSH-PULL PRO PUSH-PULL CODE DESCRIPTION CODE DESCRIPTION Tolerance between phases ± 25° , symmetry ± 15° (§) Clock-wise output rotation (see shaft). ELCIS encoder s.r.l. Via Rosa Luxembourg 12/14 10093 COLLEGNO (TO) ITALY Phone: +39 011 715577/78 a.r. MAIL: ELCIS encoder s.r.l. P.O.Box 43 10093 COLLEGNO (TO) ITALY * http://www.elcis.com * e-mail: [email protected] * Fax: +39 011 712613

Open the catalog to page 1

POSSIBLE DESCRIPTION OPTIONS DESCRIPTION Low temperature Unbreakable disk Sealed ball bearing Low torque ball bear. Invert. phase A,B,Zero. Zero logic combination Impregnated electronic High temperature Custom options ORDERING POSSIBLE HOLLOW Ø ( ( ( ( ( ( ( ( ( ( ( ( ( ( OPTIONS MODEL STANDARD NPN NPN OPEN COLL NPN NPN OPEN COLL PNP PNP OPEN COLL PUSH-PULL PRO PUSH-PULL DRIVER 26LS31 TTL 7404 DRIVER 88C30 CUSTOM OPTION CABLE END CONNECTOR IP65 encoder output POWER SUPPLY normal sealed normal sealed anticlock. clock-wise crimped normal sealed NOTE: FOR 88C30 MAX 15 Vdc (1) For further information...

Open the catalog to page 2

All ELCIS ENCODER catalogs and technical brochures