Catalogs >
ELCIS ENCODER >
Model 38CR

Model 38CR
2Pages

Catalog excerpts

INCREMENTAL ENCODER MICROMINIATURIZED LOW-COST PINION-ENCODER TO BE USED WITH RACKS OR WITH CRP LINEAR TRASDUCER FOR LINEAR DIMENSION MEASUREMENTS, WITH 0,005÷1 mm RESOLUTION. BUILT IN PINION PRE-LOAD SYSTEM. Sized draw standard version: Measures without tolerance according to UNI ISO 2768-mk * SEE 'POSSIBLE PINION' OF NEXT PAGE. ALUMINIUM STEEL 230 g STAINLESS STEEL PINION 0,5 kg see 'CONNECTION' of page 2 std. 54 sealed low torq. standard 5000 10 - 1,5 x 10^9 revolutions 40 G x 11ms 10 G (10 ÷ 2000 Hz) (see page 2) 5÷24V -10÷70 °C -25÷80 °C 50 ÷ 2500 100 kHz (160 option) max 120 LED with >= 100000 h life (°) IP according to CEI EN 60529,EN 60529,IEC 529 (**) intermittent max RPM + 30% of continuous max RPM ELECTRONICS CODE DESCRIPTION LINE DRIVER CODE DESCRIPTION CODE DESCRIPTION Tolerance between phases ± 45° , symmetry ± 20° (§) Clock-wise output rotation (see shaft). ELCIS encoder s.r.l. Via Rosa Luxembourg 12/14 10093 COLLEGNO (TO) ITALY Phone: +39 011 715577/78 a.r. MAIL: ELCIS encoder s.r.l. P.O.Box 43 10093 COLLEGNO (TO) ITALY * http://www.elcis.com * e-mail: info@elcis.com * Fax: +39 011 712613

Open the catalog to page 1

POSSIBLE DESCRIPTION Custom options TERMINAL BOX ORDERING POSSIBLE PINION ( ( ( ( ( ( ( ) ( ) ( ) ( ) ( ) ( ) ( H ) PUSH-PULL ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( N ) LINE DRIVER ( ) (only 5V) OPTIONS MODEL POWER SUPPLY CABLE END CONNECTOR IP65 encoder output (VMC) 7c normal (TMC) 7c sealed (VLC) 10c normal (TLC) 10c sealed (VDC) 9c (VHC) 12c anticlock. ( ) ( ) (VEC) 5c ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) (1) For further information see PULSES/REVOL. data sheet (2) For further information see ELECTRONIC data sheet (3) For further information see CONNECTION data sheet ELCIS company has the...

Open the catalog to page 2