*mydirectindustry

Model 106BK

Product catalog summary

Technical Specifications:
- The encoder is a two-shaft model with ball bearings and a through-shaft made of stainless steel. It includes two internal encoders with independent numbers of pulses per revolution (PPR).
- The power supply is electronically and galvanically insulated between the encoders.
- The base and cover are made of anodized aluminum, and the device weighs 2200 grams.
- The shaft diameter is 12 mm, made of stainless steel, with a maximum radial/axial load of 18 kg.
- The encoder has a continuous maximum RPM of 6000, with a starting torque of 45 gcm.
- It is designed to withstand impact resistance of 50 G x 11ms and vibration resistance of 12 G (10 ÷ 2000 Hz).
- Operating temperature ranges from 0 to 70 °C, and storage temperature ranges from -30 to 85 °C.
- The number of pulses per revolution ranges from 1 to 2540, with a maximum frequency of 100 kHz (300 kHz optional).
- The light source is an LED with a life expectancy of over 100,000 hours.

Electronics:
- Various electronic configurations are available, including standard NPN, PNP, and push-pull options.
- The device supports a range of power supply voltages from 5 to 30 V.

Possible Options:
- Options include low temperature, unbreakable disk, sealed ball bearing, different shaft diameters, and high frequency capabilities.
- Custom options and configurations are available upon request.

Ordering Information:
- The encoder can be ordered with various configurations for pulses per revolution, power supply versions, and electronic connections.
- The product is manufactured according to UNI EN ISO 9001:2000 standards and comes with a two-year warranty from the delivery date.

Catalog excerpts

INCREMENTAL ENCODER TWO-SHAFT ENCODER WITH BALL BEARINGS AND THROUGH-SHAFT IN IN ST.STEEL, MADE BY 2 INTERNAL ENCODERS WITH INDIPENDENT N.OF PPR POWER SUPPLY, ELECTRONIC AND GALVANICALLY INSULATED BETWEEN THEM. Sized draw standard version: Measures without tolerance according to UNI ISO 2768-mk ANODIZED ALUMINIUM (*) ANODIZED ALUMINIUM (*) 2200 g (*) Ø 12 STAINLESS STEEL 18 kg see 'CONNECTION' of page 2 std. 65 sealed 66 low torq. standard Z 6000 3000 45 60 - (°) IP according to CEI EN 60529,EN 60529,IEC 529 (*) custom options 1,5 x 9^10 revolutions 50 G x 11ms 12 G (10 ÷ 2000 Hz) (see page 2) 5÷30V 0 ÷ 70 °C (*) -30 ÷ 85 °C 1÷2540 + 1÷2540 100 kHz (300 option) std 120 line driver 180 (*) LED with >= 100000 h life ELECTRONICS CODE DESCRIPTION K Q R P U B H STANDARD NPN NPN OPEN COLL NPN NPN OPEN COLL PNP PNP OPEN COLL PUSH-PULL PRO PUSH-PULL DRIVER 26LS31 TTL 7404 DRIVER 88C30 2x PUSH-P.PRO 2x PUSH-PULL Tolerance between phases ± 25° , symmetry ± 15° (§) Clock-wise output rotation (see shaft). ELCIS s.r.l. Via Rosa Luxembourg 12/14 10093 COLLEGNO (TO) ITALY Phone: +39 011 715577/78 a.r. MAIL: ELCIS s.r.l. P.O.Box 90 10093 COLLEGNO (TO) ITALY * http://www.elcis.com * e-mail: [email protected] * Fax: +39 011 712613

Open the catalog to page 1

POSSIBLE DESCRIPTION OPTIONS CODE Low temperature Unbreakable disk Sealed ball bearing Invert. phase A,B,Zero. Zero logic combination Impregnated electronic High temperature Compressed air attack Oil seal Tropicalization Custom options TERMINAL BOX STANDARD NPN NPN OPEN COLL NPN NPN OPEN COLL PNP PNP OPEN COLL PUSH-PULL PRO PUSH-PULL DRIVER 26LS31 TTL 7404 DRIVER 88C30 2x PUSH-P.PRO 2x PUSH-PULL DISCRIMINAT. SINUSOID.1Vpp CUSTOM OPTION I Enc.+II Enc. ( CV ) Sole cable ( CC ) CV + CV ( ) CABLE END CONNECTOR IP65 encoder output I Enc.+II Enc. (VK ) Sole connect. (VLM) VL + VM (VML) VM + VL (VMM)...

Open the catalog to page 2

All ELCIS ENCODER catalogs and technical brochures