*mydirectindustry

Catalogs
ELCIS ENCODER
INCREMENTAL ENCODER 59Z

INCREMENTAL ENCODER 59Z

Product catalog summary

Product Overview: The 59Z encoder is a robust incremental encoder designed for use on motors, featuring a through hollow shaft without internal coupling. It is manufactured by ELCIS encoder s.r.l., based in Collegno, Italy.

Technical Specifications:

Material: Anodized aluminum base and Valox 420 cover.
Weight: 300 grams.
Shaft Diameter: 5 to 15 mm, made of stainless steel.
Maximum Load: Radial and axial load up to 6 kg.
Protection Rating: IP ratings according to CEI EN 60529 standards.
Maximum RPM: Continuous max RPM varies from 3000 to 8000 depending on configuration.
Torque: Starting torque ranges from 50 to 110 gcm.
Environmental Resistance: Impact resistance of 50 G x 11ms and vibration resistance of 12 G (10 ÷ 2000 Hz).
Temperature Range: Operating temperature from 0 to 70°C, storage temperature from -30 to 85°C.
Pulses per Revolution: 1 to 50000.
Maximum Frequency: 100 kHz, with an option for 300 kHz.
Power Consumption: Standard 120 mA, line driver 180 mA.

Electronics and Options:

Various electronic configurations including NPN, PNP, and push-pull options.
Custom options available for specific requirements.

Connection Options:

Multiple cable and connector configurations available, including low temperature and terminal box outputs.

Ordering Information: The encoder can be customized with different shaft diameters, electronic configurations, and connection types. It is supplied with a conformity declaration and a two-year warranty.

Compliance and Standards: The product is manufactured according to UNI EN ISO 9001:2008 standards and comes with a CE mark.

Catalog excerpts

VERY STURDY ENCODER WITHOUT COUPLING INSIDE WITH THROUGH HOLLOW SHAFT. DESIGNED FOR USE ON MOTORS. Family: I page: 05. 59Z 1/2 data sheet . II 039 E00 Sized draw standard version: CV R Measures without tolerance according to UNI ISO 2768-mk - Max.rad/axial load - IP output side.(°) - IP shaft side..(°) opt. type (page 2) - Contin. max RPM(**)> - Starting torque gcm> ANODIZED ALUMINIUM VALOX 420 300 g 0 5-15 PASS.THR.STAINL.ST. 6 kg see 'CONNECTION' of page 2 std. 64 sealed 65 low torq. 53 standard Z B IP according to CEI EN 60529,EN 60529,IEC 529 custom options -30 - 85 °C 1 - 50000 100 kHz (300 option) std 120 line driver 180 (*) °) MTTFd according to EN ISO 13849-1 *) intermittent max RPM + 30% of continuous max RPM CODE DESCRIPTION mA CODE DESCRIPTION mA CODE DESCRIPTION mA STANDARD NPN 10 NPN OPEN COLL 10 NPN 7 0 NPN OPEN COLL 70 PNP 7 0 PNP OPEN COLL 70 PUSH-PULL PRO 70 PUSH-PULL 70 Tolerance between phases (§) Clock-wise output rotation (see shaft). ELCIS encoder s.r.l. Via Rosa Luxembourg 12/14 10093 COLLEGNO (TO) ITALY Phone: +39 011 715577/78 a.r. MAIL: ELCIS encoder s.r.l. P.O.Box 70 10093 COLLEGNO (TO) ITALY * http://www.elcis.com * e-mail: [email protected] * Fax: +39 011 712613

Open the catalog to page 1

CODE DESCRIPTION L Low temperature Y Unbreakable disk Z Sealed ball bearing B Low torque ball bear. CODE DESCRIPTION J Zero logic combination K Invert. phase A,B,Zero. X Custom options G Tropicalization CONNECTOR CH CH5 CH6 CABLE END CONNECTOR VM TM VL TL VD VH VH5 VI VE VK TK VN VH6 VM5 VM9 VS VD5 TERMINAL BOX OUTPUT: RAD OUTPUT: RAD OUTPUT: ( K ) NPN OPEN COLL ( Q ) NPN ( R ) NPN OPEN COLL ( P ) PNP ( U ) PNP OPEN COLL ( B ) PUSH-PULL PRO ( H ) PUSH-PULL ( N ) DRIVER 26LS31 ( T ) TTL 7404 ( C ) DRIVER 88C30 ( Y ) SINUSOID.lVpp ( X ) CUSTOM OPTION

Open the catalog to page 2

All ELCIS ENCODER catalogs and technical brochures