*mydirectindustry

Catalogs
ELCIS ENCODER
INCREMENTAL ENCODER 47

INCREMENTAL ENCODER 47

Product catalog summary

Overview: The document is a technical datasheet for a miniature incremental encoder equipped with an internal Oldham coupling, designed for direct installation on motors. The encoder case can rotate on the mounting flange, allowing alignment of electrical and mechanical zero points.

Specifications:

Material: Anodized aluminum for both base and cover.
Weight: 95 grams.
Shaft: Ø 6 to 12.7 mm hollow Ergal.
Max radial/axial load: 0.5 kg.
Ball bearings life: 1.5 x 10⁹ revolutions.
Impact resistance: 50 G x 11ms.
Vibration resistance: 12 G (10 ÷ 2000 Hz).
Operating temperature: 0 to 70 °C.
Storage temperature: -30 to 85 °C.
Number of pulses per revolution: 1 to 2540.
Max frequency: 60 kHz (100 kHz optional).
Max consumption: Standard 120 mA, line driver 180 mA.
Light source: LED with a lifespan of ≥ 100,000 hours.

Technical Features:

Max joint compensation: Axial ± 0.15mm, radial ± 0.15mm, angular ± 3°.
Continuous max RPM: 6000.
Starting torque: 15 gcm.
IP rating: According to CEI EN 60529, EN 60529, IEC 529.

Electronics:

Various electronic configurations available, including NPN, PNP, and push-pull options.
Driver options include 26LS31 and TTL 7404.

Options and Configurations:

Low temperature, unbreakable disk, and various frequency options.
Custom options available for specific requirements.

Ordering Information: The encoder is available in various configurations, including different shaft diameters, electronic types, and connection options. It is manufactured according to ISO EN 9001 standards and comes with a conformity declaration and a two-year warranty.

Catalog excerpts

INCREMENTAL ENCODER MINIATURE ENCODER EQUIPPED WITH INSIDE OLDHAM COUPLING WHICH CAN BEDIRECTLY INSTALLED ON MOTORS,THE ENCODER CASE CAN ROTATE ON THE 47 MOUNTING FLANGE AND ALLOWS AN ALIGNMENT OF 'ELE.ZERO'WITH'MEC.ZERO' Sized draw standard version: CV R Measures without tolerance according to UNI ISO 2768-mk Max joint compensation: axial ± 0,15mm, radial ± 0,15mm, angular ± 3° - Max.rad/axial load - IP output side.(°) - IP shaft side..(°) opt. type (page 2) - Contin. max RPM(**)> - Starting torque gcm> std. 53 standard 6000 15 (°) IP according to CEI EN 60529,EN 60529,IEC 529 (*) custom options CODE DESCRIPTION -30 a 85 °C 1 a 2540 60 kHz (100 option) std 120 line driver 180 (*) STANDARD NPN NPN OPEN COLL NPN NPN OPEN COLL PNP PNP OPEN COLL PUSH-PULL PRO PUSH-PULL (§) (§) Tolerance between phases ± 2 5 ° , symmetry ± 15° (§) Clock-wise output rotation (see shaft). * http://www.elcis.com * e-mail: [email protected] * Fax: +39 011 712613 ELCIS s.r.l. Via Rosa Luxembourg 12/14 10093 COLLEGNO (TO) ITALY Phone: +39 011 715577/78 a.r. MAIL: ELCIS s.r.l. P.O.Box 90 10093 COLLEGNO (TO) ITALY

Open the catalog to page 1

All ELCIS ENCODER catalogs and technical brochures