Radio controls for concrete mixers

Product catalog summary

Overview: This document provides technical specifications and features of radio controls designed for concrete mixers, specifically focusing on the VETTA PICMINI+ and E1 MINI+ transmitters, as well as the AR E1 MINI and MITO MINI receivers.

Specifications:

Transmitters: The E1 MINI+ transmitter supports 2 to 6 single-shot commands, features a self-retaining emergency stop compliant with PL d cat. 3 EN ISO 13849-1, and includes 4 feedback LEDs. It uses a replaceable internal lithium battery with fast charging via an ELCA-CLIP USB cable. The MITO electronics variant offers a PL c stop and status LED only.
Power Supply: Transmitters are powered by a 3.7V lithium battery or 3xAA 1.5V alkaline batteries, with a transmission consumption of less than 45 mA and absorbed power under 0.15 W.
Radio Frequency: Operates in the USM band with frequencies ranging from 433.100 to 434.775 MHz and optional frequencies up to 921.150 MHz, using GFSK modulation.
Operating Conditions: The devices function within a temperature range of -25 to +55 °C and have an operating range of 150 meters.
Protection and Durability: Transmitters have an IP65 protection degree, while receivers have an IP67 rating.

Receivers:

Technical Data: Receivers are powered by 12-24 Vdc or 12-30 Vdc/12-24 Vac at 50/60Hz, with dimensions of 110x165x50 mm. They support 8 On/Off controls and have 4 feedback inputs.

Additional Features:

Both the E1 VETTA and E1 PIC transmitters include 3-position selectors and a self-retaining stop, with PL d cat. 3 EN ISO 13849-1 compliance and fast charging capabilities.

Manufacturer Information: ELCA srl, located in Mussolente, Italy, reserves the right to modify product specifications without notice.

Catalog excerpts

Radio controls for concrete mixers

Open the catalog to page 1

Radio controls for concrete mixers ELCA-CLIP E1 MINI+ transmitter, from 2 to 6 single-shot commands, self-retaining emergency stop, PL d cat. 3 EN ISO 13849-1, 4 feedback LEDs (manageable from the respective receiver inputs), replaceable internal lithium battery and fast charging with ELCA-CLIP USB cable. AR E1 MINI receiver. E1 VETTA transmitter: 5 3-position selectors and selfretaining stop, PL d cat. 3 EN ISO 13849-1 , 4 feedback LEDs (manageable from the respective receiver inputs), replaceable internal lithium battery and fast charging with ELCA-CLIP USB charging cable. AR E1 MINI receiver....

Open the catalog to page 2

All ELCA RADIOCONTROLS catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list