Automatic power supply Battery charger / Wall supports BRAVO NiMH batteries MITO Technical Data TRANSMITTERS Electronics: E Models: MIA - EVO (E1) - MINI+ (E1) PIC - VETTA - PUNTO - SFERA - VEDO - M Radio frequency USM band Electronics: Mito Models: MINI - MINI+ - PIC - VETTA Electronics: BRAVO Model: VEDO - M LI-TE Li-Ion Battery 7,4 V Power in your hands. elcaradio.com MIA, EVO, MINI, MINI+, PIC, VETTA: Lithium pol. batt. 3,7V Power supply VEDO: LI-TE Li-Ion Battery 7,4 V PUNTO, SFERA, M: NiNH PINC-GEH Battery 7,2 V Operating temperature Operating range RF 868 / 915 MHz <25mW ERP “auto power tuning” RF 433 MHz <10mW ERP RF 868 / 915 MHz <25mW ERP “auto power tuning” RF 433 MHz <10mW ERP Protection degree Technical Data RECEIVERS Electronics: MAGO Model: EVO Power supply E/MITO MINI Protection degree up to: - 12 digital +3 proport. - 4 digital feedback inputs up to: - 42 digital - 42 digital - 37 digital + 3 proportional - 28 digital + 6 proportional - opt. expansion board CanOpen, EtherNet/IP, PROFINET, PROFIBUS com. - 4 digital feedback inputs up to: - 12 digital - 4 digital feedback inputs up to: - 16/24 digital - 16 digital + 6 proportional - optional expansion board CanOpen, EtherNet/IP, PROFINET, PROFIBUS communications - 4 digital feedback inputs ELCA srl Via del Commercio, 7b 36065 Mussolente (Vicenza) ITALY Tel. +39.0424.578500 - Fax +39.0424.578520 [email protected] - www.elcaradio.com ELCA srl strives to continuously improve its products; it therefore reserves the right to modify the contents of this brochure without notice.All rights reserved. Mito 36 digital 4/8/10 digital 18+8 proportional E + CanOpen - 8 digital communication - CanOpen - 3 digital - 4 digital feedback feedback inputs inputs 8 NPN/PNP OPEN COLLECTOR + 2 analogue

MAGO series - E1 series E series - BRAVO series E series - BRAVO series Receivers The receiving unit is an integral part of the radiocontrol; it is connected to the electrical panel of the machine to be controlled and is activated by the transmitter with the Start command (ready for the commands). The model and electronics vary based on the type and number of digital/proportional functions and the power supply (Vac/Vdc). ELCA receivers are easy to install and can work also in extreme conditions. Wiring, connections, fixing plates, external antennas upon request. MIA is the ELCA’s industrial handheld...

MAGO series - E1 series E series - BRAVO series E series - BRAVO series Receivers The receiving unit is an integral part of the radiocontrol; it is connected to the electrical panel of the machine to be controlled and is activated by the transmitter with the Start command (ready for the commands). The model and electronics vary based on the type and number of digital/proportional functions and the power supply (Vac/Vdc). ELCA receivers are easy to install and can work also in extreme conditions. Wiring, connections, fixing plates, external antennas upon request. MIA is the ELCA’s industrial handheld...

Automatic power supply Battery charger / Wall supports BRAVO NiMH batteries MITO Technical Data TRANSMITTERS Electronics: E Models: MIA - EVO (E1) - MINI+ (E1) PIC - VETTA - PUNTO - SFERA - VEDO - M Radio frequency USM band Electronics: Mito Models: MINI - MINI+ - PIC - VETTA Electronics: BRAVO Model: VEDO - M LI-TE Li-Ion Battery 7,4 V Power in your hands. elcaradio.com MIA, EVO, MINI, MINI+, PIC, VETTA: Lithium pol. batt. 3,7V Power supply VEDO: LI-TE Li-Ion Battery 7,4 V PUNTO, SFERA, M: NiNH PINC-GEH Battery 7,2 V Operating temperature Operating range RF 868 / 915 MHz <25mW ERP “auto power...