EVO handheld radio control

Product catalog summary

Overview: The EVO handheld radio control by ELCA is designed for controlling machines and industrial lifting systems via radio, adhering to current regulations. It features a compact, lightweight, and ergonomic design with low-consumption electronics and a lithium power supply.

Specifications: The device includes 6 double release buttons, 1 programmable function button, a start button, and a STOP mushroom button. It is equipped with two LEDs indicating battery charge status, capable of up to 40 hours of continuous use. The protective case should remain on during charging. The EVO is shock-resistant and suitable for severe conditions, with an ABS hull and IP65 protection.

Functionality: The EVO can receive and display up to 4 signals from the controlled machine. It features an electronic code key for activation and programmable automatic switch-off. The system automatically stops in case of radio disturbance and selects the first available frequency upon restart. The 'Function' button supports various commands, including impulsive and selection commands.

Components: Each EVO radio control package includes a transmitter unit, a receiver unit (options: AR E1 MIDI, AR E1 MINI, AR E1 FLEXI, AR MAGO FLEXI), a power supply with USB ELCA-CLIP cable, a shoulder strap, a cover, and a user manual.

Technical Data: The EVO operates in the ISM band frequency range of 433.100 - 434.775 MHz, with an optional range of 915.050 - 927.800 MHz. It uses LBT mode of transmission with a Hamming distance of ≥ 9. Safety functions comply with EN 13849-1 standards, offering stop protection (PL d) and protection from unintended movements (PL c).

Receivers: Various receiver models are available, each with different power supply options, protection degrees, dimensions, and control capabilities. Communication options include CanOpen, EtherNet/IP, PROFINET, and PROFIBUS.

Additional Information: The transmitter is powered by a 3.7V Li-Po battery, with an operating temperature range of -20 to +55 °C and an operating range of 100 meters. Optional accessories include a wall bracket with spring opening.

Contact: ELCA srl, Via del Commercio, 7b, 36065 Mussolente (Vicenza), ITALY. Tel. +39.0424.578500, Fax +39.0424.578520, Email: [email protected], Website: www.elcaradio.com

Catalog excerpts

EVO handheld radio control ELCR RADIOCONTROLS

Open the catalog to page 1

handheld radio control EVO is the ELCA handheld that controls machines and industrial lifting and handling systems by radio, in full compliance with current regulations. It consists of 6 double release buttons, 1 button with programmable function, start button and STOP mushroom button. Compact, lightweight and ergonomic with low-consumption electronics and lithium power supply. Two LEDs, green and red, indicate the battery state of charge (up to 40 hours of continuous use). The protective case, supplied standard with each system, must not be removed while charging. EVO is resistant to shocks...

Open the catalog to page 2

Technical Data E1 ELECTRONICS ISM band work frequency Hamming distance Passive Stop Time Active Stop Time - Stop protection MAGO ELECTRONICS Safety functions (according to EN 13849-1): - Protection from unintended movements from the rest position (UMFS) Power supply Optional accessories Wall bracket with spring opening ELCR RADIOCONTROLS ELCA srl strives to continuously improve its products; it therefore reserves the right to modify the contents of this brochure without notice.All rights reserved.

Open the catalog to page 3

All ELCA RADIOCONTROLS catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list