EAN CODE : 3760244880... VOLT / AMP / PROCESS ^ VERY COMPACT : 3/64 DIN - 24 X 72 mm LUMINOUS : 14 mm LED for easy reading. EASY : Quick installation without tools. - Disconnect screw terminal blocks. CONFIGURABLE : By button in front panel, - DC / AC / AUTO on voltmeter & ammeter: - 0-10 V / 0-20 mA / 4-20 mA on process - High and low adj. limits of -1999 to 9999 PRACTICAL : Direct Power supply +5 V or 7,5 V to 12 V. - Optional power supply until 264 VAC isolated* PROTECTION : Front : IP55 and case : IP31. : 31/2 digits 14 mm red LED displays. : ± 0,1%, + 1 digit on DC mode. ± 0,25%, + 1 digit on RMS mode. • Frequency measurement limit (RMS mode) : 40 to 750 Hz. • Power supply : + 5 Volts, ± 5% regulated, or + 7,5 to 12 Volts rectified and filtered. • Current consumption : 160 mA. • Temperature drift : 0,011% / °C. • Display's cadency : 1,3 per second on DC mode. 0,5 to 1,5 per second RMS on AC mode. • Red antireflection filter • The measurement input (e-) and power supply-grounds are common except in case of the use of one of the optional power supplies. • Configuration : By button in front of panel - DC, AC, AUTO mode and decimal point on voltmeter & ammeter - 0-10 V / 0-20 mA / 4-20 mA, decimal point & limit display on process • Presentation : Display of the AC tension presence. Two clips on its sides that allow a fast assembly without tools on any surface with a thickness included between 0,8 and 5 mm. Front : IP55 and case : IP31. • Cut-out dimensions : 22,2 x 68 mm minimum and 22,5 x 68,8 mm maximum. The face of the case respects the DIN norms : 24 x 72 mm, depth : 49 mm and 96 mm with optional accessories. • Connection : plug-in connector to wire up 2.5mm2 • Optional accessories : Power supplies *AL48250 : High tension (galvanic insulation 4 KV) Input : from 40 to 264 V AC or from 40 to 370 V DC *AL1040 : Low tension (galvanic insulation 4 KV) Input : from 9 to 28 V AC or from 8 to 40 V DC Shunt *SH10020 : 20 A ; 100 mV shunt, 0,5 class, DIN rail mounting Note : The selected gauge will be that configured and calibrated for the delivery. The other gauges will have an accuracy of 1%.

TEST LEADS AND ACCESSORIES INSULATED : For use with test leads fitted with 4 mm plugs to make safe measurements. PRECISE : The JPT 085 test prods are designed for WIDTHSTANDING : Silicone-insulated leads, highly flexible and widthstanding temperatures up to +230 °C. FLEXIBLE GRIPPERS ALLIGATOR CLIPS TEST PRODS SILICONE LEADS Specifications Flexible grippers • JGF 160 : et of 2 flexible grippers, 160 mm long, with 4 mm diam. S Safety connector, one red and one black. Rotating body. Flexible rod for gripping up to 4 mm pins or leads. Reinforced insulation, complies with EN 61010-031: 2008, categorie...