Wayber is the name of an analogue microwave link able to Self-contained compact solution (1U RACK 19”) Slim line indoor units transport a Mono or a FM MPX stereo signal from studio to FM transmitter. Compact and reliable, it features very high quality and modern technology both in signal processing and microwave section leading to outstanding performances. This new equipment is compatible with T-R/NBFM from Elber, now out of sale. Digital Signal Processing Technology Very low phase noise Very High spurious suppression Excellent Noise figure FM stereo Multiplex or audio Mono inout TFT front panel control Dual Power supply (Hot Swappable) The front panel presents a 2“ TFT touchscreen, the Ethernet managment port, a USB connector for customer authentication and firmware upgrade, one fan field-replaceable and some leds for immediate information about equipment status. The back panel hosts all input/output connectors either for baseband and RF signals; baseband interfaces are Left and Right (analogue and AES-EBU), MPX and SCA. If inputs are Left and Right channel, the transmitter can act also as a stereo encoder, generating the MPX signal adding SCA subcarriers or creating RDS data through UECP protocol over RS-232 interface (future option). For easy assembly, maintenance or bandpasss filter replacement , the transmitter and the receiver boards can be extracted from the back avoiding to open the equipment. The microwave section is wideband and can work between 400 MHz-1 GHz and 1-2.8 GHz. Based on a Linux embedded OS, it offers a very intuitive GUI, either through web and Touchscreen TFT display. Power supply can be single (AC and/or DC) or dua

Pre-emphasis: MPX/SCA/RDS Inputs: Impedance: Level: Level adj. MPX: Level adj. SCA: Connector Sensitivity: (@ dev control = 100%, atten = OFF ) MPX1/RDS SCA1/ SCA2 Pilot: CH right CH left Deviation clipping limit: MPX/SCA Outputs: Connectors: Impedance: Level: Level adj. : De-emphasis: Gain Flatness: MPX: SCA: Outputs: Connectors: Impedance: Output Level: S/N Unweighted: Stereo Separation: THD+noise: Gain ripple: SPECIFICATIONS General: Frequency agility: any 25 MHz (bandpass filter) Frequency resolution: 1 KHz Frequency stability: ± 1 ppm IF frequency: 125 MHz (anal.), 25 MHz (digital),...