Catalogs >
Elatech S.r.l. >
SYNCRO-MAX

SYNCRO-MAX
4Pages

Catalog excerpts

ELATECH® SYNCRO-MAX® Extra-wide ELATECH® SYNCRO-MAX® Extra-wide Polyurethane Belts extend the advantages of synchronous timing belts to wider surfaces and to the typical applications of flat and modular conveyor belts. Made of Polyurethane and reinforced with Aramid, ELATECH® SYNCRO-MAX® Extra-wide Belts provide positive drive and synchronous conveying resulting in no slippage, better tracking, higher indexing/positioning precision, smaller drive pulley requirements, lower belt tension, lower shaft loads and consequently power saving. Open or jointed, coated with Silicon, Rubber, PU or PVC...

Open the catalog to page 2

Belt characteristics • Polyurethane timing belt with Aramid tension cords • Tooth profile according to ISO 17396 • Metric pitch 10 mm • Natural colour PU compound 92 Sh A • Standard roll length = 50 m Technical Data Belt width b [mm] Flexibility Minimum pulley number of teeth and minimum idler diameter Other widths are available on request. Tooth shear strength / rpm 60 E 50 CL) Q. 40 LL 30 20 The specific load FUspez is the maximum load which one single belt tooth 1 cm wide can withstand in all operating conditions. This force is related to the drive rpm. The total load Fu transmissible by...

Open the catalog to page 3

Belt characteristics • Polyurethane timing belt with Aramid tension cord • Tooth profile according to UNI/ISO 5296 • Imperial pitch 1/2” = 12,7 mm • Natural colour PU compound 92 Sh A • Standard roll length = 50 m Technical Data Belt width b Code / mm Flexibility Minimum pulley number of teeth and minimum idler diameter Other widths are available on request. Tooth shear strength / rpm FU [N] FUspez [N/cm] ze zemax zemax zemax b [cm] The specific load FUspez is the maximum load which one single belt tooth 1 cm wide can withstand in all operating conditions. This force is related to the drive...

Open the catalog to page 4