Group: Scaglia
Catalog excerpts
Polyurethane BELTS 2017 Technology in Motion.
Open the catalog to page 1Page ELATECH® Company Profile Introduction to ELATECH® polyurethane belts Product range Material characteristics ELATECH® M and V Introduction Product certification Tension cords Mechanical and chemical properties Executions and ordering examples Technical data • Metric profile T, AT, ATL • Inch pitch profile MXL, XL, L, H, XH • HTD profile and HTD profile high load XHPL • RTD and STD profile • EAGLE profile - Self tracking timing belts TK and ATK •Total Protection belts (T10TP - AT10TP - HTD8M TP) • Flat belts, Flat belts Heavy Series and Poly-V • 10 TT5 Clamping plates ELATECH®...
Open the catalog to page 2ELATECH® is a Company fully dedicated to the research, development and manufacture of polyurethane belts for industrial applications. The unique manufacturing processes, made possible with the newest generation of technologies, the modern and efficient test and control equipment and a unique team of qualified technicians and engineers, allow ELATECH® to offer superior products with highest flexible service. Global Presence With 5 sister Companies on 3 continents and a wide range of qualified distributors, ELATECH® guarantees superior technical and delivery service worldwide. Our Mission...
Open the catalog to page 3Research & Development We strongly believe innovation is the key to success for our Customers. We are totally committed to quality and close cooperation with our customers to solve the problems of design engineers in the most advanced and economical way. Our qualified technicians and our advanced test laboratory with the most modern resources allow us to offer the most effective solutions in all conveying, lifting or power transmission applications. Total Quality In ELATECH® the term "quality" is not only limited to the product. We offer professional and competent consulting services with...
Open the catalog to page 4Introduction ELATECH® manufactures polyurethane belts for linear motion, conveying, lifting and power transmission applications. The combination of a polyurethane body reinforced with special steel or aramid tension members, allows the belt to fulfil the most severe requirements in all industrial applications. The unique manufacturing processes developed with the newest generation technologies such as test and control equipment, give us the ability to deliver superior products with the highest flexibility of service. ELATECH® offers the widest range of tooth profile to enable the design...
Open the catalog to page 5Material characteristics ELATECH® belts are manufactured as standard in thermoplastic polyurethane 92 Sh. A hardness. Non standard material and compounds are available for applications in special enviroments or for special specifications. Standard colour, unless differently specified, is white. Other colours are available upon request. Resistance to oils ELATECH® polyurethane has an high resistance to most oils. The following graph compares synthetic rubber CR and NBR with ELATECH® polyurethane. Chemical resistance The impact of chemicals on ELATECH® polyurethane results in different...
Open the catalog to page 6Chemical resistance Chemical reference Chemical reference Note • The above table is valid for material to be conveyed containing chemicals and or oil. In case of immersion, please contact our technical department. • It must be considered that alkalis, acids, peroxides, water and water solutions may corrode the steel tension member. Please contact our technical department for solutions. A = resistant over a prolonged period B = conditionallly resistant, after a certain time appreciable differences are possible C = not resistant, short-term contact possible D = not resistant, pronounced attack
Open the catalog to page 7Materials for standard applications Materials for applications where antistatic properties are required - Static conductive materials
Open the catalog to page 8The timing belts manufactured by ELATECH® have been designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications where precise synchronisation is needed. ELATECH® timing belts are manufactured with the body in thermoplastic polyurethane with excellent wear resistance and with high tensile strength steel cords. A special polyamide fabric on the tooth (on request) reduces the coefficient of friction, improves the tooth engagement and reduces noise. Tension Cords In order to maximize the application of ELATECH® timing belts,...
Open the catalog to page 11Executions ELATECH® M They are manufactured in rolls with standard length of 100 m. On request longer or shorter lengths are available. Main applications are linear drives. Ordering example profile H cut to length: Ordering example roll 100 m profile T : ELATECH® “R” - Roll 100 m ELATECH® timing belt type “R” ELATECH® timing belt type “M” Width (x 0,254 = mm) - 3 digits Profile “H” A= stainless steel cords S= inox cords K= Kevlar® cords F= high flexiblity cords P= high power cords Pitch 10 mm A= steel cords S= inox cords K= Kevlar® cords F= high flexiblity cords P= high power cords Length...
Open the catalog to page 12T 2,5 Belt characteristics • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 2,5 mm • Ideal for drives where high belt flexibility is requested • Widely used for conveying, linear drive and light power transmission applications • Color: white Tooth shear strength / rpm Fu [N] FUspez [N/cm] ze zemax zemax zemax b [cm] The specific load FUspez is the maximum load which one single belt tooth 1 cm wide can withstand in all operating conditions. This force is related to the drive rpm. The total load Fu transmissible by the belt in the drive...
Open the catalog to page 13Flexibility Type of cord Minimum pulley number of teeth and minimum idler diameter STANDARD Timing pulley zmin Drive without reverse bending Flat idler running on belt teeth dmin Timing pulley zmin Drive with reverse bending Flat idler running on belt back dmin
Open the catalog to page 14All Elatech S.r.l. catalogs and technical brochures
-
BROCHURE ATF PROFILE
4 Pages
-
EAGLE BROCHURE
7 Pages
-
SYNCRO-MAX BROCHURE
4 Pages
-
COATING
19 Pages
-
COMPLETE CATALOGUE
209 Pages
-
EFT
2 Pages
-
EMF
2 Pages
-
PAZ-PAR
7 Pages
-
ELA-flex SD™
32 Pages
-
SYNCRO-MAX™
4 Pages
-
Scaglia group
9 Pages
-
SYNCRO-MAX
4 Pages
-
ELATECH iSync
12 Pages
-
SYNCRO-MAX
4 Pages
-
ELA-FLEX SD
32 Pages
-
M and V
90 Pages
-
ELATECH® Drive Calculation
25 Pages
-
Polyurethane belt
32 Pages
-
Eagle polyurethane belt
6 Pages
-
Polyurethane belts
174 Pages
Archived catalogs
-
ELATECH® ISync
14 Pages
-
HTD14MXHPL
2 Pages