M and V
90Pages

The timing belts manufactured by ELATECH® have been designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications where precise synchronisation is needed. ELATECH® timing belts are manufactured with the body in thermoplastic polyurethane with excellent wear resistance and with high tensile strength steel cords. A special polyamide fabric on the tooth (on request) reduces the coefficient of friction, improves the tooth engagement and reduces noise. Tension Cords In order to maximize the application of ELATECH® timing belts,...

Executions ELATECH® M They are manufactured in rolls with standard length of 100 m. On request longer or shorter lengths are available. Main applications are linear drives. Ordering example profile H cut to length: Ordering example roll 100 m profile T : ELATECH® “R” - Roll 100 m ELATECH® timing belt type “R” ELATECH® timing belt type “M” Width (x 0,254 = mm) - 3 digits Profile “H” A= stainless steel cords S= inox cords K= Kevlar® cords F= high flexiblity cords P= high power cords Pitch 10 mm A= steel cords S= inox cords K= Kevlar® cords F= high flexiblity cords P= high power cords Length...

T 2,5 Belt characteristics • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 2,5 mm • Ideal for drives where high belt flexibility is requested • Widely used for conveying, linear drive and light power transmission applications • Color: white Tooth shear strength / rpm FU [N] FUspez [N/cm] ze zemax zemax zemax b [cm] The specific load FUspez is the maximum load which one single belt tooth 1 cm wide can withstand in all operating conditions. This force is related to the drive rpm. The total load Fu transmissible by the belt in the drive...

Flexibility Type of cord Minimum pulley number of teeth and minimum idler diameter STANDARD Timing pulley zmin Drive without reverse bending Flat idler running on belt teeth dmin Timing pulley zmin Drive with reverse bending Flat idler running on belt back dmin

Tooth shear strength / rpm FU [N] FUspez [N/cm] ze zemax zemax zemax b [cm] The specific load FUspez is the maximum load which one single belt tooth 1 cm wide can withstand in all operating conditions. This force is related to the drive rpm. The total load Fu transmissible by the belt in the drive is calculated by: = peripheral force = specific load = number of teeth in mesh in the small pulley = max. no of teeth in mesh to be considered for the calculation of the drive = 12 for ELATECH® M = 6 for ELATECH® V = belt width in cm

Belt width b [mm]

T 10 Belt characteristics • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 10 mm • Ideal for drives where high belt flexibility is requested • Widely used for conveying, linear drive and medium power transmission applications • Double sided tooth construction available • Width tolerance: • Length tolerance: • Thickness tolerance: Technical Data Load / Elongation [ % ] Belt width b [mm] Other widths are available on request. * = double cords spacing Tooth shear strength Tooth shear strength / rpm 60 E ^ 50 The specific load FUspez...

T 10 Belt width b [mm] * = double cords spacing

T 20 Belt characteristics • Polyurethane timing be It with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 20 mm • Ideal for drives where high belt flexibility is requested • Widely used for conveying, linear drive and heavy power transmission applications • Double sided tooth construction available Tooth shear strength / rpm FU [N] FUspez [N/cm] ze zemax zemax zemax b [cm] The specific load FUspez is the maximum load which one single belt tooth 1 cm wide can withstand in all operating conditions. This force is related to the drive rpm. The total load Fu...

Belt width b [mm]

Belt characteristics • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 3 mm • Tooth profile and dimension are optimised to guarantee unifor load distribution and minimum deformation under load • High resistance and low stretch steel cords to guarantee high stability and low elongation • Reduced polygonal effect with reduced drive vibration • Particularly suitable for linear drives and light power transmission applications with high axial and angular positioning accuracy • Negative length tolerance available on request Tooth shear...

Minimum pulley number of teeth and minimum idler diameter

Belt characteristics • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 5 mm • Tooth profile and dimension are optimised to guarantee uniform load distribution and minimum deformation under load • High resistance and low stretch steel cords to guarantee high stability and low elongation • Reduced polygonal effect with reduced drive vibration • Particularly suitable for linear drives and light power transmission applications with high axial and angular positioning accuracy • Double sided tooth construction available • Negative length...

Belt width b [mm]

Belt characteristics • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 10 mm • Tooth profile and dimension are optimised to guarantee uniform load distribution and minimum deformation under load • High resistance and low stretch steel cords to guarantee high stability and low elongation • Reduced polygonal effect with reduced drive vibration • Particularly suitable for linear drives and medium power transmission applications with high axial and angular positioning accuracy • Double sided tooth construction available • Negative length...