COMPLETE CATALOGUE
209Pages

ELATECH® Polyurethane Belts ELATECH® Profiles table chart 02 ELATECH® Company Profile 06 Introduction to ELATECH® polyurethane belts 08 Mechanical and chemical properties 14 Technical data • Metric profile T, AT, ATF, SAT, ATL 16 • Inch pitch profile MXL, XL, L, H, XH 30 • HTD profile and HTD XHPL high load 35 • Self tracking profiles TK - ATK - HK - ATKK 54 • Flat belts, Flat belts Heavy Series, Poly-V and Flat belts (Lift) 66 ELATECH® SYNCRO MAX® - Extra-Wide 79 Technical data • Metric profile T10 81 • Inch pitch profile H 82 ELATECH® iSync® - High Performance Timing Belts 117 Standard...

FAMILY TYPES M Open end F ELA-Flex SD® W Syncro Max® U iSync® * Dual tooth available (on request for special cords)

CORD TYPES HPF High Flexibility and Performance HPL High Performance XHPL Extra High Performance ■ FLAT ■ TOTAL PROTECTION ■ TT5 ■ SPECIAL

FAMILY TYPES M Open end F ELA-Flex SD® W Syncro Max® U iSync® * Dual tooth available (on request for special cords)

HPF High Flexibility and Performance HPL High Performance XHPL Extra High Performance ■ FLAT ■ TOTAL PROTECTION ■ TT5 ■ SPECIAL

Global Presence With 6 sister Companies on 3 continents and a wide range of qualified distributors, ELATECH® guarantees superior technical and delivery service worldwide. ELATECH® is a Company fully dedicated to the research, development and manufacture of polyurethane belts for industrial applications. The unique manufacturing processes, made possible with the newest generation of technologies, the modern and efficient test and control equipment and a unique team of qualified technicians and engineers, allow ELATECH® to offer superior products with highest flexible service. Our Mission...

We strongly believe that innovation is the key to success for our customers. We are totally committed to quality and close cooperation with our customers to solve the problems of design engineers in the most advanced and economical way. Our qualified technicians and our advanced test laboratory with the most modern resources allow us to offer the most effective solutions in all conveying, lifting or power transmission applications. Total Quality In ELATECH® the term "quality" is not only limited to the product. We offer professional and competent consulting services with fast and reliable...

Introduction ELATECH® manufactures polyurethane belts for linear motion, conveying, lifting and power transmission applications. The combination of a polyurethane body reinforced with special steel or aramid tension members, allows the belt to fulfil the most severe requirements in all industrial applications. The unique manufacturing processes developed with the newest generation technologies such as test and control equipment, give us the ability to deliver superior products with the highest flexibility of service. ELATECH® offers the widest range of tooth profile to enable the design...

ELATECH® belts are manufactured as standard in thermoplastic polyurethane 92 Sh. A hardness. Non standard material and compounds are available for applications in special environments or for special specifications. Standard colour, unless differently specified, is white. Other colours are available upon request. Resistance to oils ELATECH® polyurethane has an high resistance to most oils. The following graph compares synthetic rubber CR and NBR with ELATECH® polyurethane. Abrasion resistance ELATECH® polyurethane has excellent abrasion resistance properties. The graph below shows comparison...

Chemical reference A = excellent B = good C = limited D = not recommended For any request please contact our technical department.

Materials for standard applications Materials for applications where antistatic properties are required - Static conductive materials ^ Available on request, please contact our sales department.

ELATECH® Open End - M and V The timing belts manufactured by ELATECH® have been designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications where precise synchronisation is needed. ELATECH® timing belts are manufactured with the body in thermoplastic polyurethane with excellent wear resistance and with high tensile strength steel cords. A special polyamide fabric on the tooth (on request) reduces the coefficient of friction, improves the tooth engagement and reduces noise. ■ HPL high performance cords: the cord cross section...

They are manufactured in rolls with standard length of 100 m. On request longer or shorter lengths are available. Main applications are linear drives. Ordering example roll 100 m profile T: ELATECH® “R”- Roll 100 m Ordering example profile H cut to length: T ELATECH® timing belt type “R” ELATECH timing belt type “M” A= steel cords S= stainless steel cords K= aramid cords F= high flexibility cords P= high performance cords A= steel cords S= stainless steel cords K= aramid cords F= high flexibility cords P= high performance cords Z= fabric on teeth (PAZ) R= fabric on back (PAR) D= fabric PAZ...

BELT CHARACTERISTICS Polyurethane timing belt with steel tension cords Tooth profile according to ISO 17396 Metric pitch 2.5 mm Ideal for drives where high belt flexibility is requested Widely used for conveying, linear drive and light power transmission applications STANDARD TOLERANCES WIDTH TOLERANCE: ±0,3 [mm] Standard steel cord Belt width b [mm] Other widths are available on request Specialties Belt width b [mm] Tooth shear strength Flexibility Minimum pulley number of teeth and minimum idler diameter Elatech® V Joined informations Allowable tensile load of joined belt is 50% of M -...

Elatech® M and V QCh BELT CHARACTERISTICS • Polyurethane timing belt with steel tension cords • Tooth profile according to ISO 17396 • Metric pitch 5 mm • Ideal for drives where high belt flexibility is requested • Widely used for conveying, linear drive and light power transmission applications • Double sided tooth construction available STANDARD TOLERANCES WIDTH TOLERANCE: ±0,5 [mm] TECHNICAL DATAStandard steel cord Belt width b [mm] Other widths are available on request Elatech® V Joined informations Allowable tensile load of joined belt is 50% of M - open end [*] Timing pulleys ^ page...