COATING
19Pages

Polyurethane belts for conveying applications The unique chemical and mechanical features of ELATECH® belts together with the possibility of a wide range of backings in different materials make ELATECH® belts ideal for all conveying applications where synchronization is required. The engineer designer has unlimited possibilities to make a unique design. Minimum pulley diameter The minimum pulley diameter can be calculated by means of the "pulley multiplier" shown for each type of backing. Minimum pulley diameter = backing thickness x pulley multiplier CD. As a general rule, we may say that...

Polyamide The special polyamide fabric backings allow a reduction of the friction coefficient and when applied fabric backings on teeth, decrease noise in high speed drives. They are very useful in applications with sliding surfaces or product accumulation. Polyamide fabrics with antistatic properties are available. PAZ Polyamide backing on tooth side. Reduces coefficient of friction and allows a smoother tooth engagement. PAR Polyamide backing on back side. Reduces coefficient of friction. PAZ-PAR PAZ-PAR: Polyamide backing on both tooth and back side. Coefficient of static friction •...

CELLULAR Covering Materials Polyurethane / Rubber foam backings are easily compressible according to the cellular structure of the material. Due to this main characteristic, common applications are: labelling equipment, light and/or fragile materials conveying, glass and paper industry, vacuum conveyors. Pulley diameter: CD • Backing Thickness Elatech Code Microcellular elastomeric polyurethane Coefficient of static friction on steel SYLOMER GREEN SYLOMER BROWN Coefficient of static friction on steel Material Colour Conveying Applications Pulley diameter: CD • Backing Thickness Elatech Code...

CELLULAR Covering Materials ech Pulley diameter: CD • Backing Thickness

PVC has a high coefficient of friction and a good resistance to acids. Due to its versatility, it is used in many applications in the paper, glass, ceramic industry, labelling and packing equipment. Its quality allows the application in food industry processes. Among all synthetic materials and rubber compounds, polyurethane is the material which offers the best resistance to abrasion. Polyurethane films of different thickness and different shore hardness, applied on ELATECH® belts, are an ideal solution in many applications in the wood processing, ceramic and glass industry. On request it...

Pulley diameter: CD • Backing Thickness

Many different rubber backings in both synthetic and natural rubber are available. Due to rubber's high friction coefficient and high temperature resistance, ELATECH® polyurethane belt with rubber backing is used in many different conveying application: paper industry, ceramic industry, wood processing industry, glass industry, labelling and packaging machines. Pulley diameter: CD • Backing Thickness

Pulley diameter: CD • Backing Thickness

Special backings are available in quite a different range of materials to cover even the most demanding design requirements. Pulley diameter: CD • Backing Thickness

Pulley diameter: CD • Backing Thickness

ELATECH® EMF – Mechanical Fastening System ELATECH® EMF - Mechanical Fastening System allows in many conveying applications cost savings associated with being able to design equipment around the installation principle of EMF . ∙ EMF maintains the same minimum pulley requirements as the belt and can operate with back bend idlers. ∙ It is excellent for belt applications with special backings such as Linatex, Supergrip, PVC, Fishbone, etc. EMF fits snug, which eliminates gaps otherwise seen in competing designs. ∙ It is suitable for belts with profiles for quick installation, saving time and...

SAFELOCK - EMF PIN MODULE (PATENT PENDING) • Better adhesion due to the pin with milled edges • Available for all the EMF standard range • Made in stainless steel Conveying Applications

ELATECH® EFT – False Tooth System EFT is ELATECH mechanical profile application system specially designed for fastening cleats that cannot be welded onto polyurethane timing belts. Zinc-coated or stainless steel teeth are available, either with our embedded tooth or total tooth design. With the total tooth design, the EFT replaces the entire tooth of the belt and is safely secured by means of two threaded holes. The embedded tooth design prevents any metal-to-metal contact, ensuring more silent operation. Total tooth design Embedded tooth design Many are the advantages offered by ELATECH®...

TAS154 - suitable for AT10 and H profile 25 mm wide, one pin TAS210 - suitable for AT10 profile 32 mm wide, two pins at 20 mm centre distance TAS150 - suitable for AT10 profile, 50 mm wide, two pins at 25 mm centre distance Conveying Applications TAS155 - suitable for AT10 profile, 75 mm wide, three pins at 25 mm centre distance TAS158 - suitable for AT20 and XH profile, 25-50-75-100 mm wide, number of pins multiple of 25 mm centre distance TAS142 - suitable for AT20 and XH profile, 50 mm wide, two pins at 25 mm centre distance

Mechanical processing Thanks to top quality, state of the art machinery and techniques such as water jet cutting, ELATECH® timing s belts can be mechanically processed to perform specialurf a ce and complex tasks. The extremely precise machining and finishing operations guarantee the respect of the strictest tolerance requirements and the maximum reliability of ELATECH® timing belts in all the most complex and demanding industrial applications. Depending on the application requirements, mechanical Conveying Applications The great precision and the versatility of water jet cutting technology...

ELATECH® polyurethane belts with profiles It is possible to attach profiles on all ELATECH® M and V, ELA-flex SD® and iSync® polyurethane belts for conveying, handling and positioning applications. The cleats are produced in the same material of the belts in order to guarantee the maximum strength. The belts with profiles allow a synchronised translation of the products at very high speeds and low noise. A very wide range of profiles is available. If the required profile is not shown in the following pages, please contact our technical office. Arc of contact It is to be noted that the...