TWN3 MIFARE M

Product catalog summary

Overview: The TWN3 MIFARE M is a single-frequency HF RFID module with NFC support, designed for easy integration into various applications. It supports USB or RS-232 communication based on the connection cable and is available as a PCB for direct integration into embedded applications. The module can be programmed with a script language for executing complex commands autonomously.

Technical Specifications:

Frequency: 13.56 MHz (HF)
Antenna: PCB aircoil, integrated
Dimensions: Approx. 76.00 x 49.00 x 14.00 mm
Power: USB: 5.0 V ± 10%; RS-232: requires 5 V external power supply
Current Consumption: 55 mA typically (USB, normal operation); 120 mA peak
Temperature Range: Operating: -25 °C to +80 °C; Storage: -40 °C to +85 °C
Humidity: 5% to 95% non-condensing
Read/Write Distance: Up to 100 mm
Operating Modes (USB): USB keyboard emulation, USB virtual COM port, Direct access to RFID module
MTBF: 500,000 hours
Weight: Approx. 15 g
Supported Transponders: Varies with firmware; refer to ELATEC transponder matrix
OS Support: Windows 7 and higher, Linux
Peripheral Interfaces: USB, RS-232, 2 GPIOs, 5 V TTL serial interface
Transmission Speed: USB full speed (12 Mbit/s); RS-232: baudrate 9600
Certifications: CE/RED, REACH, RoHS-III compliant

Accessories:

Cables: Various USB and RS-232 cables available in different lengths
Power Supplies: Available for AUS, EU, UK, and US regions

Contact Information: ELATEC GmbH and its subsidiaries provide contact details for Germany, USA, and China, including phone numbers and email addresses.

Disclaimer: ELATEC reserves the right to change information without notice and disclaims responsibility for use outside specified conditions.

Catalog excerpts

TWN3 MIFARE M Single-frequency HF RFID module with NFC support TWN3 MIFARE M (exemplary illustration) TWN3 MIFARE M is an RFID reader module designed for easy integration into various applications that supports either USB or RS-232 communication just in dependence on the connection cable. The module is available as a PCB without housing for direct integration into embedded applications. It can be programmed with a script language for autonomous execution of even complex commands like login procedures, increment/decrement functions and many more. © 2024 – ELATEC GmbH – TWN3 MIFARE M – data sheet – DocRev02 – EN – 05/2024

Open the catalog to page 1

TECHNICAL DATA FREQUENCY ’The product has been certified for use in many countries and regions. Contact your Sales representative for detailed information about all certifications and approvals granted to the product. © 2024 - ELATEC GmbH - TWN3 MIFARE M - data sheet - DocRev02 - EN - 05/2024

Open the catalog to page 2

POWER SUPPLIES ELATEC Systems GmbH Schwieberdinger Str. 44 71636 Ludwigsburg Germany P +49 7141 309736 0 E-Mail: [email protected] Website: elatec.com USB cable type A 200 cm / 78.74 inch USB cable type A 12 cm / 4.72 inch USB cable type A 45 cm / 17.72 inch USB cable type A 120 cm / 47.24 inch USB cable mini 12 cm / 4.72 inch USB cable mini 25 cm / 9.84 inch RS-232 cable 200 cm / 78.74 inch Power supply (AUS) Power supply (EU) Power supply (UK) Power supply (US) ELATEC Inc. 1995 SW Martin Hwy Palm City • FL 34990 USA P +1 772 210 2263 F +1 772 382 3749 E-Mail: [email protected] Website:...

Open the catalog to page 3

TWN3 MIFARE M

TWN3 MIFARE M

Catalog excerpts

All ELATEC catalogs and technical brochures