Sample Preparation of rubber and plastic materials
4Pages

Sample Preparation of rubber and plastic materials Specimen Cutting Press, EP 02 for preparation of test specimens of rubber and plastic materials, by punching. EP 02 is a small and compact pneumatic press for preparation of test specimens in the laboratory. EP 02 stands on rubber feet and does not need to be attached to the table. The cutting press also has a system for quick change of cutting dies. Specimen Cutting Press, EP 08 for preparation of test specimens of rubber and plastic materials, by punching. EP 08 is a small and compact manual press for preparation of test specimens in the laboratory. EP 08 stands on rubber feet and does not need to be attached to the table. The cutting press also has a system for quick change of cutting dies. Specimen Rotating Knives, EP 03 for preparation of test specimens for compression set and abrasion tests from test sheets and finished products. The rotating knives are manufactured of specially grounded hardened steel. They are used in a stationary drilling machine, against a soft base material and lubricated with ethanol or propanol. Using of cutting dies with a guiding rod When cutting samples which curl and do not lie flat, the guiding rod (EP 04.04) can be used. The guiding rod makes it possible to have the cutting die standing on the sample and yet get guiding. The rod is included when purchasing EP 02 or EP 08. Specimen Cutting Dies, EP 04 are manufactured in both standard and special shapes. A special shank for mounting in presses EP 02 and EP 08 can be fitted. Shanks for other cutting presses are available. All cutting dies are now manufactured with an ejector plate, which helps the work and protects the edges and operator. Elastocon AB . Tvinnargatan 25 . SE-507 30 BRÄMHULT . Sweden . Phone +4633-22 56 30 . Fax +4633-13 88 71 E-mail: info@elastocon.se . www.elastocon.se

Spec imen C utting Press Cutting pressure, kN: Air pressure. Bar: Stroke, mm: Height adjustment, mm: Cutting die height, mm: Base Plate size.mm: Dimensions w x d x h, mm: Weight, kg: Material: Safety: Spare Parts Cutting Mat, EP 02.01 Size, mm: Cutting Mat, EP 08.01 Size, mm: Specimen Rotating Knifes, EP 03 Material: hardened steel Standard sizes: Specimen Cutting Dies, EP 04 Material: hardened steel Standard shapes eg.: ISO 37-1 - ISO 527-5 = ASTM D 412 die C ISO 37-2 = ISO 527-5A ISO 37-4 = ISO 527-5B ISO 34-A (trouser) = ASTM D 624 die T ISO 34-B (angle) = ASTM D 624 die C ISO...

Sample Preparation of rubber and plastic materials Pyrolyse Oven, EP 01 for IR-Analysis The equipment consists of a small tube oven, a flowmeter and a DC-current power source. EP 01 meets the requirements in ISO and equivalent standards for pyrolysis when doing IR-analysis of rubbers. The test sample is put into a Pasteur pipette and the pipette is connected to a nitrogen gas supply. Nick Cutter, EP 07 for making the nick in the test specimen for ISO 34 die B, C and ASTM D624-B. Nick depth :1 mm, alternatively 0,5 mm with a different blade holder. Round dies EP 04 with a diameter from 13 mm...

Tube Oven, EP 01 Temperature range, °C: Temperature tolerance, °C: Dimensions l x dia, mm: Tube inner diameter, mm: Voltage,V: Power, W: Heating up time, min: DC-current source, Voltage,V: Output Voltage,V: Output Current, A: Flowmeter ,cc/ min: Nick Cutter, EP 07 Material Nick depth Spare Part Cutting blade EP 07.01 painted and stainless steel 1 mm, alternatively 0,5 mm with a different blade holder Set of 10 cutting blades Bizerba Slicer Voltage, V: Cutter diameter, mm: Cutter speed, rpm: Max. material channel mm: mm: The temperature is set by adjusting the output from the...