SAFT (Shear Adhesion Failure Tester), ES 07
2Pages

The SAFT instrument is used to test Heat-Fail Temperature in Shear of Hot Melt Adhesives. Weights are attached to the shear samples and the temperature is increased with a controlled rate until the samples fail. The ES 07 can test 6 samples simultaneously and a timer for each test station records the time to failure. The new model has an improved sensor system for detecting the sample failure which works with small loads down to 100 g. Six sets of weights, with 100 g 500 g and 1 kg are included. Tests can be performed according to ASTM D 4498 in the ES 07.

Technical specification Temperature range, °C: Temperature ramp: Temp. control, No. of test stations: Timers: Temperature sensor: Dimensions, internal, w x h x d, mm: Dimensions, external, w x h x d, mm: Weight, kg: Voltage, V: Power, W: 100 - 370 (can be re-programmed for 40-370 °C) 10°C/min (max) Preset as 10 °C/3 min then 5 min pause to next 10 °C step. 40 - 100 °C, °C: ± 1 • The casing consists of steel, painted with powder paint in bluegreen colour. • The inner chamber is made of stainless steel • Temperature controller with 0,1°C setpoint. • Solid state relay for safe...