*mydirectindustry

Catalogs
ELAP
RE620 - REM620 Square flanged encoders

RE620 - REM620 Square flanged encoders

1 / 4 PagesView full catalog

RE620 - REM620 Square flanged encoders

Product catalog summary

Mechanical & Environmental Specifications

Materials: Housing made of Aluminium, Shaft made of AISI 303 steel.
Weight: Approximately 400 g.
Shaft Diameter: Options of 6, 8, 9.52, 10 mm.
Revolutions per Minute: 6000 continuous, 10000 temporary (3000 rpm with IP66 sealing ring).
Starting Torque: ≤0.8 Ncm.
Inertia: ≤25 g cm².
Max Load: 80 N axial, 100 N radial.
Vibration Resistance: 100 m/sec² (10-2000 Hz).
Shock Resistance: 50 G (11 ms).
Protection Degree: IP65, optional IP66 with sealing ring.
Operating Temperature: -10 to 70°C.
Stocking Temperature: -20 to 80°C.

Electrical & Operating Specifications

Pulse Code: Incremental.
Pulses per Revolution: RE: 2 to 12500, REM: 8 to 2048.
Zero Reference Pulse: One pulse per revolution.
Output Signals: Two square waves 90° ±15° out of phase, Zero pulse width: 90°±15°.
Electronic Outputs: Push-pull, NPN open collector (series RE only), 5Vdc or 5/30 Vdc line driver, signals protected against short circuits.
Supply Voltage: 5/30 Vdc, protection against polarity reversal.
Absorption: 30 to 80 mA max.
Max Frequency: 100 KHz, 200 KHz for ppr > 1250.
Connections: Axial or radial cable 3 m long, 1 m for line driver output, Axial or radial MS connector, 7-pin/10-pin for line driver output.

Mechanical Versions & Pulses per Revolution

RE/REM620 & RE/REM650: Body Ø 58 mm, Flange 63.5x63.5 mm, Centering mask Ø 31.75 mm or 50 mm, Shaft Ø 6, 8, 9.52, 10 mm.
Pulses per Revolution Options: Various options ranging from 2 to 12500 for RE series and 8 to 2048 for REM series.

Ordering Information

Output Signals: PP (Push-pull), OC (NPN Open Collector for series RE), LD (Line-driver).
Shaft Diameter Options: 6, 8, 9.52, 10 mm.
Supply Voltage: 5/30 Vdc.
Pulses per Revolution: RE: 2 to 12500, REM: 8 to 2048.

Connection Information

Connection Positions: Axial (A), Radial (R).
Connection Outlet: Sealing ring, Connector (C), Cable (K), Connector outlet with O-ring on the shaft (J).
Connection Diagrams: Various diagrams for different signal configurations.

Additional Information

Further information and dimensional drawings are available at the provided links.
Elap reserves the right to upgrade the product without notice.

Catalog excerpts

RE620 - REM620 Square flanged encoders-1

RE/REM Square Flanged INCREMENTAL ROTARY ENCODERS • Incremental rotary encoders with or without zero pulse • Pulses per revolution: 2 to 12500 • Aluminium housing • Several configurations available *Max operating speed with IP66 sealing ring applied on the shaft: 3000 rpm * NPN open collector: series RE only ELECTRICAL & OPERATING SPECIFICATIONS Pulse code Pulses per revolution Zero reference pulse Output signals Electronic outputs Supply voltage Absorption Max frequency Connections one pulse/revolution Two square waves 90° ±15° out of phase - Zero pulse width: 90°±15° push-pull, NPN open collector*, 5Vdc or 5/30 Vdc line driver signals protected against short circuits 5/30 Vdc protection against polarity reversal 30-80 mA max 100 KHZ / 200 KHz for ppr>1250 Axial or radial cable 3 m long /1 m for line driver output Axial or radial MS connector, 7-pin/10-pin for line driver output MECHANICAL VERSIONS PULSES PER REVOLUTION ELAP VIA VITTORIO VENETO, 4 • 1-20094 CORSICO (Ml) - TEL. +B9.02.451 9561 FAX+39.02.45103406 • E-MAIL [email protected] • SITE

Open the catalog to page 1

RE620 - REM620 Square flanged encoders-2

CONNECTIONS Push Pull - Open Collector NPN SIGNALS 7-pin connector Cable colours SIGNALS Line Driver 7-pin connector Cable colours 10-pin connector Cable colours I DIAGRAM 3 without 0 pulse A B D F C E G White Green Red Blue Brown Yellow DIAGRAM 4 with 0 pulse A White CONNECTION OUTLET - Sealing ring - Connector C Cable K Connector outlet - O-ring on the shaft J Cable outlet - O-ring on the shaft RE/REM620 - RE/REM650 no zero pulse RE/REM621 - RE/REM651 zero pulse ELAP RESERVES THE RIGHT TO UPGRADE THE PRODUCT WITHOUT NOTICE

Open the catalog to page 2

RE620 - REM620 Square flanged encoders-3

RE/REM620 RE62Q uscita serracavo RE620 cable ouput REB20 uscita connettore 7p RE620 7pin auput connector RE620 uscita connettore lOp RE620 lOpin ouput connector Albero disponibile nei diametri 8mm — 9.52mm — 10mm Albero 06mm L=10 Available shaft diameters 8mm — 9.52mm — 10mm Shaft 06mm L— 10 Rif. M1464V RE/REM650 RE650 uscita serracavo RE650 cable ouput RE650 uscita connettore 7p RE650 7pin ouput connector RE650 uscita connettore lOp RE650 lOpin ouput connector

Open the catalog to page 3

RE620 - REM620 Square flanged encoders-4

Further information and dimensional drawings at the following links: https://www.elap.it/incremental-encoders/encoder-re620/ https://www.elap.it/incremental-encoders/encoder-rem/ SQUARE FLANGED ALTERNATIVE ENCODER SERIES: Body 0 58 mm, h 38 mm • M12 connector or cable outlet Body 0 58 mm • Aluminium housing • Aluminium housing • UL Listed ELAP VIA VITTORIO VENETO, 4 • 1-20094 CORSICO (Ml) -TEL. +39.02.45 FAX+39.02.45103406 • E-MAIL [email protected] • SITE WWW.ELAP.IT

Open the catalog to page 4

All ELAP catalogs and technical brochures

Archived catalogs

PNS PN2S ILK with IO-Link Interface
2 Pages