*mydirectindustry

Catalogs
ELAP
PM PM2S Linear Potentiometers

PM PM2S Linear Potentiometers

1 / 4 PagesView full catalog

PM PM2S Linear Potentiometers

Product catalog summary

Electrical & Operating Specifications

Sensor Type: Conductive plastic resistive element
Resistive Value: 5 KOhm ±20%, with optional 1 KOhm ±20% for 25 mm stroke
Available Strokes: 25, 50, 75, 100, 150 mm
Linearity: Ranges from ±0.2% to ±0.075%
Resolution: Infinite
Voltage: 28 Vdc permissible applied voltage
Load Resistance: Minimum 1 MOhm
Cursor Current: Recommended < 1 µA
Mechanical Life: 100 million cycles
Repeatability: <0.01 mm
Dissipation: 3 W at 40°C
Insulation Resistance: >100 MOhm at 500 Vdc
Connections: DIN EN61984 (VDE 0627) connector, axial or radial position

Mechanical & Environmental Specifications

Materials: Anodised aluminium housing, stainless steel rod
Rod Diameter: Ø 5 mm
Fixing: Clamping brackets or ball joints
Max Linear Speed: 5 m/sec
Sliding Friction: 0.1 Kg, 0.5 Kg with return spring
Vibration Resistance: 15 g (10÷2000 Hz)
Shock Resistance: 50 g (11 ms)
Operating Temperature: -20 to 80°C
Storage Temperature: -30 to 90°C
Protection Degree: IP64

Linear Motion Potentiometers

Series: PM and PM2S
Features: Easy mounting, excellent linearity, infinite resolution, IP64 protection
Connector Type: Axial for PM, radial for PM2S
Ball Joints: Two Ø 5 mm for PM2S

Available Strokes

Nominal Stroke: 25, 50, 75, 100, 150 mm
Electrical Stroke: Nominal stroke + 0.5 mm
Mechanical Stroke: Nominal stroke + 2 mm

Connections

Connector Type: 4-pin DIN EN61984 (VDE 0627)
Orientation: Female connector orientable in four positions

Mounting & Optional Fittings

Mounting: Freely placed brackets, ball joints, and self-aligning joints
Optional Features: Feeler pin, in- or out-return spring for strokes up to 100 mm

Ordering Information

Resistance Values: 1K or 5K Ohm
Stroke Options: 25, 50, 75, 100, 150 mm
Type: PM or PM2S
Fittings: Inside return spring (MR), outside return spring (MRE), ball joint (SF), self-aligning joint (GD), feeler pin (PS)

Catalog excerpts

LINEAR MOTION POTENTIOMETERS Series PM • PM2S • 25 to 150 mm • Easy mounting method • Excellent linearity • Several fittings • Infinite resolution • IP64 protection degree PM2S Strokes: 25 to 150 mm • rod 0 5 mm • axial connector Strokes: 25 to 150 mm • rod 0 5 mm • radial connector • two ball joints 0 5 mm

Open the catalog to page 1

Male fixed connector The electrical connection is granted by means of 4-pin connector type DIN EN61984 (VDE 0627) provided with female connector orientable in four positions. Female flying connector The potentiometers are easily fastened by means of the provided brackets, which can be placed freely along the body. Ball joints and self-aligning articulated joints can be used for air-fixing, allowing to compensate mounting mis-alignments. The potentiometer series PM can be provided with feeler pin and in- or out return spring (for strokes up to 100 mm) for applications as comparator. (Type PM)...

Open the catalog to page 2

CORSA NOM INALE STROKE be oriented in four positions CORSA NOMINALE STROKE Connettore volante be oriented in four positions

Open the catalog to page 3

Linear Potentiometers https://www.elap.it/linear-potentiometers/ Potentiometer PM https://www.elap.it/linear-potentiometers/pm-series/ Potentiometer PM2S https://www.elap.it/linear-potentiometers/pm2s-series/ Linear Potentiometers Potentiometer PM Potentiometer PM2S ELAP VIA VITTORIO VENETO, 4*1-20094 CORSICO (Ml)-TEL. +39.02.4519561 FAX+39.02.45103406 • E-MAIL [email protected] • SITE WWW.ELAP.IT

Open the catalog to page 4

All ELAP catalogs and technical brochures

Archived catalogs

PNS PN2S ILK with IO-Link Interface
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list