ABSOLUTE ENCODERS WITH FIELDBUS INTERFACE PIPS PROFIBUS • PROFINET CERTIFICATION NO.Z10989 TYPE [ ] MEM620-Bus - Square flange 63.5 x 63.5 mm [ ] MEM540-Bus - Round flange 0 58 mm CLAMPING FLANGE [ ] MEM520-Bus - Round flange 0 58 mm SYNCHRO FLANGE [ ] MEM440-Bus - Blind hollow shaft for motor coupling [ ] MEM450-Bus - Blind hollow shaft, fixing by elastic support Iprofinet communication protocol Ehternet-based communication underwent a huge development in recent years. PROFINET communication protocol, in particular, has become the leading standard in industrial field, thanks to its high performance in safety, accuracy and data transmission speed. ausoaa® MEM-BUS PROFINET encoders iTtVqIqT grant: SmSam • Rapid data transfer • System state diagnostic • Early error detection • Network topology configuration • Easy operation through user telegram 860 • Easy cabling and installation • Compact size Operating principle • Encoder Profile V4.1 version 3.162 • Application class 3 - 4 • RT real-time & IRT real-time isochronous transmission mode • Parameter entering via TCP/IP • Standard Telegrams 81,82, 83, 84 -User Telegram 860 PROFINET connectors (port 1 and 2) M12 female type, D code SUPPLY CONNECTOR M12 male type, A code • Steps/revolution • Revolutions number • Preset • Rotation direction The encoder MEM-BUS PROFINET can be software run by means of standard telegrams 81,82, 83 and 84, or by means of the simplified telegram 860. • Simplified telegram 860: Perfectly similar to PROFIBUS telegrams, it provides the position (32 bit) and enables to manage the absolute preset. • Telegram 81: It provides the absolute position, the factorized preset position the position value or the possible error; it allows to manage the main commands. • Telegram 82: equivalent to telegram 81, il provides the 16-bit instant speed value, too. • Telegram 83: equivalent to telegram 82, il provides the 32-bit instant speed value. • Telegram 84: equivalent to telegram 83, it provides the 64-bit factorized absolute position The speed measuring unit (step/s, step/100ms, step/10ms, RPM), selected in the starting parameter entering phase, can be modified run-time. * Elap reserves the right

*AVAILABLE SHAFT DIAMETERS 8 - 10 mm length 20 mm 6 mm length 10 mm *AVAILABLE SHAFT DIAMETERS 8 - 10 mm length 20 mm 6 mm length 10 mm 5.3 8.8 *AVAILABLE SHAFT DIAMETERS 8 - 10 mm length 20 mm 6 mm length 10 mm ELAP srl Via Vittorio Veneto, 4 - 20094 Corsico (Mi) tel. +39 02 451.95.61 - fax +39 02 45.10.34.06 [email protected] - www.elap.it ABSOLUTE ENCODERS WITH FIELDBUS INTE