HLS Wire Encoder

1 / 2 PagesView full catalog

HLS Wire Encoder

Product catalog summary

Mechanical & Environmental Specifications

Dimensions: Refer to drawings.
Weight: HLS-S < 450 g, HLS-M < 1000 g, HLS-L < 3500 g.
Materials: Aluminium housing, stainless steel wire SUS 304 with nylon coating.
Wire Diameter: HLS-S 0.6 mm, HLS-M 0.7 mm, HLS-L 1.0 mm.
Breaking Load: HLS-S 16 Kg, HLS-M 23 Kg, HLS-L 60 Kg.
Max Travel Speed: 1000 m/sec.
Starting Torque on Spring: HLS-S < 600 g, HLS-M < 1000 g, HLS-L ≤2200 g.
Vibration Resistance: 10 g (10÷1500 Hz).
Shock Resistance: 20 g (11 ms).
Operating Temperature: HLS-S 0 ÷ 60°C, HLS-M & HLS-L -10 ÷ 60°C.
Stocking Temperature: HLS-S -20 ÷ 70°C, HLS-M & HLS-L -20 ÷ 80°C.
Protection Degree: HLS-S IP50, HLS-M & HLS-L IP64.

Electrical & Operating Specifications

Strokes: HLS-S 1000 mm, HLS-M 1000/5000 mm, HLS-L 6000/12000 mm.
Zero Pulse: 1 per encoder revolution.
Resolution: HLS-S 1 - 0.5 – 0.2 – 0.1 – 0.04 mm, HLS-M 1 - 0.5 – 0.2 – 0.1 – 0.05 mm, HLS-L 1 - 0.5 mm.
Output Signals: Push-pull, line driver 5V or 10/24Vdc.
Voltage Supply: 10÷24 Vdc, 5 Vdc for line driver.
Power Consumption: 60 mA.
Connections: HLS-S cable 50 cm, HLS-M & HLS-L cable 1 m.

Ordering Information

Wire Incremental Encoders: Series HLS with return spring, measures from 1 to 12 m, easy mounting.
Electronic Output: Push-pull, LD Line-driver 10/24 Vdc, LD5V Line driver 5 Vdc.
Supply: 10/24 Vdc, 5 Vdc Line driver.
Stroke Options: 1000 mm to 12000 mm in increments of 1000 mm.
Type: HLS-S, HLS-M, HLS-L with specific strokes, resolutions, and dimensions.
Resolution Options: 1 mm, 0.5 mm, 0.2 mm, 0.1 mm, 0.05 mm.

References

Further information available at: https://www.elap.it/wire-transducers/wire-encoder-hls/

Catalog excerpts

WIRE INCREMENTAL ENCODERS Series HLS• Wire incremental encoders with return spring • Measures: from 1 to 12 m • Easy mounting HLS-S HLS-M TTPE HLS-S HLS-M HLS-L ELECTRONIC OUTPUT - Push-pull LD Line-driver 10/24 Vdc LD5V Line driver 5 Vdc

Open the catalog to page 1