THERMAL ANALYSIS INSTRUMENTS QRU-100

Product catalog summary

Overview and Features
The QRU-100 Thermal Monitoring Kit is designed for evaluating the thermal performance of buildings efficiently and accurately. It is essential for modern construction, renovation, quality assurance, and energy efficiency assessments. The kit includes separate indoor and outdoor measuring units to monitor heat flux and temperature, allowing for the measurement of thermal transmittance (U-value) and thermal resistance (R-value) according to ISO 9869, ASTM C1046, and ASTM C1155 standards. The kit is housed in a weather-proof case, with each unit featuring a long-life battery and a high-resolution data logger capable of storing up to 4 million data points.

Introduction and Operation
The QRU-100 is intended for building inspectors, energy audit specialists, researchers, and energy advisors. It is lightweight, easy to use, and pre-configured for immediate deployment. The kit supports the assessment of a building's thermal performance, aiding in heat loss diagnosis and insulation quality evaluation. The QRU-100 operates independently without cross-wiring between units, making it a flexible and accurate solution for measuring U and R-values.

Setup and Usage
Setting up the QRU-100 is straightforward: select the measurement area, start the loggers, install the units on the wall, and leave them in place for 72 hours. Data is downloaded using provided software, allowing professional users to analyze results according to ISO 9869 and ASTM standards.

Software and Applications
The QRU-100 data logger software is available for download from the EKO website. It allows users to edit data acquisition settings, set startup times, and initiate monitoring. The kit is ideal for quality assurance, heat loss diagnosis, and thermal comfort evaluation, supporting energy-saving opportunities and renovation optimization.

Specifications
Key specifications include unit dimensions of 80 x 12 x 60 mm, a heat flux sensor model EKO HF-01S, temperature sensor type RTD PT-1000, and a temperature range of ±200°C. The power source is a LITH12 battery, and the kit includes a mini USB cable for PC connection.

Contact Information
For more information, contact EKO Instruments through their regional offices in Japan, Europe, USA, India, and China.

Catalog excerpts

THERMAL ANALYSIS INSTRUMENTS SPECIFICATION SHEET QRU-100 Thermal Monitoring Kit For Buildings The QRU-100 is designed to make the thermal performance evaluation of buildings and its components easy, efficient, and accurate. A critical requirement for modern construction, renovation, quality assurance, and energy efficiency assessment, the QRU-100 thermal monitoring kit includes separate indoor and outdoor measuring units. Indoor heat flux monitoring, together with indoor and outdoor temperature sensors, allow the QRU-100 to measure both thermal transmittance and thermal resistance, the U and R-Value of a wall or similar structure based on the standard methods defined in ISO 9869, ASTM C1046 and ASTM C1155. The QRU-100 is delivered in a weather-proof case. Each measuring unit has a long-life battery and ultra-high resolution data-logger that can store up to 4 million data points, pre-configured and ready to use. Pre-configured, quick set up & ready to go Tough carry case & Weather resistant housing Independent ultrahigh resolution data loggers in each unit Compatible with ISO 9869, ASTM C1046 & C1155 in-situ thermal measurement

Open the catalog to page 1

In-situ monitoring of heat flux and temperature is critical for assessing a building's thermal performance, supporting heat loss diagnosis as well as insulation quality evaluation. In turn, understanding thermal performance has, in light of climate and environmental concerns, never been more essential to the effective and efficient management of the built environment. The QRU-100 Thermal Monitoring Kit for Buildings is designed for building inspectors, energy audit specialists, researchers, and energy advisors. It is easy to use, lightweight and comes pre-configured and ready to go; ready to...

Open the catalog to page 2

QRU-100 data logger software is available from the EKO website. Simply download, install, and connect your QRU-100 loggers using the USB cables provided. Figure 2. Measurement results of QRU-100 on a wall, following the ISO9869 international standard. The software allows the user to edit the data acquisiton settings; set the startup time, the logging interval, and initiate monitoring. Applications The QRU-100 Thermal Monitoring Kit For Buildings is a flexible solution for calculating the U and R-Value of a wall or a similar structure. R: Thermal Resistance [m2KW-1] ΔT: Temperature gradient [K]...

Open the catalog to page 3

Learn More Visit our website, contact our team, to find out more about the QRU-100 Thermal Monitoring Kit for buildings, related products, and the full range of Class and industry-leading products from EKO. Explore EKO Made in Japan for over 90 years, EKO solar energy sensors and environmental instruments are built on a legacy of innovation, an uncompromising commitment to quality, and industry-leading accuracy. With a range of products and services to suit every project or application requirement, explore EKO now, or get in touch to find out how EKO Instruments can help you. Thermal Analysis...

Open the catalog to page 4

THERMAL ANALYSIS INSTRUMENTS QRU-100

THERMAL ANALYSIS INSTRUMENTS QRU-100

Catalog excerpts

All EKO Instruments catalogs and technical brochures

Archived catalogs