MS-80S Pyranometer
1 / 4Pages

Catalog excerpts

MS-80S Pyranometer - 1

EKO MS-80S PyranometerTechnical Specifications ISO 9060:2018 Class A (Secondary standard) Unique "fast response & spectrally flat" Quartz diffuser technology ISO 17025 certified calibration 5 year warranty and recommended recalibration The MS-80S is an ISO 9060:2018 Class A pyranometer, in the top tier 'fast-response' and 'spectrally flat' sub-categories, with unprecedented low zero-offset behaviour, fast sensor response, and a 5-year recalibration interval. Building on the innovative patented design of the original MS-80, released in 2016, the MS-80S includes a state-of-the-art thermopile sensor, a new internal diagnostics system, and 4-channel smart interface. The internal diagnostics system offers users visibility over internal temperature, humidity, tilt and roll angle; helping to ensure optimum performance without the need for regular physical checks; while the 4-channel smart signal transducer allows the MS-80S to easily connect to any analogue or digital measuring system, giving users a choice with Modbus 485 RTU, and SDI-12 for digital output; alongside 4-20mA, and 0-10mA (0-1V) analogue options. The digital output options also enable users to connect with a standard laptop and 'Hibi'; a new, custom-built programme developed by EKO, giving real-time access to the internal diagnostics, custom settings, and data on irradiance, humidity, internal temperature and tilt angle from the sensor. With the MV-01 ventilator and heater, an optional add-on, to keep the sensor IEC 61724-1 compliant, free of dew, ice and snow; the MS-80S guarantees optimal performance under any environmental conditions; thanks to its ultra-low temperature dependency and exceptional non-linearity characteristics. MS-80S pyranometers are manufactured with strict quality controls, including a final performance evaluation before shipping. The directional response and temperature dependency of each unit are measured and validated through a measurement

Open the catalog to page 1
MS-80S Pyranometer - 2

www.eko-eu.com report that comes with the sensor. EKO calibration is compliant to international standards defined by ISO/IEC17025/9847, and each unit comes with a setting report detailing all of the parameters which were set and tested during the manufacturing process including; current range settings, digital output communication settings, tilt position calibration, relative humidity and sensor temperature. With a 5-year warranty and 5-year recommended recalibration interval, the MS-80S is best in class for accuracy, speed, reliability, and an ideal option for scientific research,...

Open the catalog to page 2
MS-80S Pyranometer - 4

Specifications are subject to change without further notice.

Open the catalog to page 4

All EKO Instruments catalogs and technical brochures